Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Buena Park, CA | Elmwood Contractors
We’re an independent General Contractor in Buena Park installing and servicing Mr-Glass shower enclosures and glass products across the 1950s-70s ranch homes that dominate this city. Most of what we open up here is out-of-square, settled, and framed decades ago – so our Mr-Glass work is as much about measuring the existing opening as it is about the glass. If you’re in 90620, 90621, 90622, or 90624 and need a frameless enclosure, tub-to-shower conversion, or shower replacement, call (866) 253-8554 for a free estimate.
We’re Mr-Glass sales & service specialists, not a franchise counter. We know the Challenger slider series, the semi-frameless hinged enclosures, the neo-angle corner units, and the custom-cut frameless panels – and we know what happens to each of them inside a Buena Park tract bathroom after 60 years of Santa Ana dry seasons and shifting stucco walls.
Why Buena Park Residents Choose Us for Mr-Glass Service
Buena Park houses were mostly built between the 1950s and 1970s, and the bathrooms reflect it: galley plans, shallow curbs, drywall-and-stucco walls that have moved a quarter inch since the Nixon administration. A Mr-Glass enclosure installed by someone who only knows new-construction openings will leak or bind within a year. We’ve spent two decades opening up these exact bathrooms, so we measure first, square what needs squaring, and then spec the enclosure that fits the actual opening – not the one that fits the showroom drawing.
Nolan Shepherd, our owner, grew up in Mr-Glass repair in Fullerton‘s Sunny Hills neighborhood around the same era of tract housing, so he’s been looking at mid-century framing since he was a teenager. He runs the same crew discipline now that he did on ground-up work in North Orange County: plumb the first time, seal it right, no callback. We name the brands going into your home before the contract is signed, and for Mr-Glass work that means OEM hardware and seals where they’re available, quality-matched aftermarket hinges and sweeps where OEM is slow or discontinued, and an honest call on when a rehang is the right fix versus when the glass itself is done.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Buena Park
- Failed seals and worn sweeps on frameless sliders. In older Buena Park bathrooms, the curb and walls were framed decades ago and are noticeably out of plumb. The track wears unevenly, the sweep tears, and water ends up on the tile every morning. We re-square the track mounting, replace the sweep and seals, and rehang the door so it travels true.
- Hinge and pivot sag on frameless hinged enclosures. The drywall-and-stucco-era walls in 90620 and 90621 have shifted over the years. Hinges pull loose, the glass drops, and the door won’t close square. We open the mounting area, add proper structural backing, and reset the hardware.
- Mineral and hard-water etching on glass and chromed aluminum frames. Hot, dry Santa Ana seasons bake water spot residue onto panels before most cleaners can touch them. We’ll tell you honestly when the glass can be restored and when the etching means replacement makes more sense.
- Hinge-to-glass stress cracks and chipped edges. When an original enclosure was mounted on undersized or non-structural backing, the hardware pulls loose over time and the glass takes the stress. We sees cracks radiating from hinge cutouts on units installed this way. We replace the panel and fix the backing so it doesn’t happen again.
- Track and roller failures on Challenger-style sliding doors. The rollers on these sliders were good for their era, but after decades of use on a settling curb, they flatten and bind. We keep replacement roller kits and tracks in rotation for fast Buena Park turnaround.
Mr-Glass Service in Buena Park: What Local Conditions Mean for Your Equipment
Almost every Buena Park job we quote is a remodel inside a fully built-out city with no clean-slate lots. The older tracts around the 90620/90621 line – the old Walter Knott and dairy-farm land that got platted lot-by-lot after the war – were built tight to the property line with shallow setbacks and side yards. That means a shower enclosure project here is as much about measuring an existing, out-of-square opening as it is about the glass itself. A frameless Mr-Glass enclosure is a precision product. Put it in an opening that’s 3/8″ out of square and the door will never close flat. On a 1950s ranch off the 90620/90621 line near Mr-Glass repair in La Palma and Knott’s Berry Farm, a homeowner’s original tub-to-shower corner was so far out of plumb the old framed slider leaked onto the tile every time it was used. We tore out the framed unit, squared the curb and wall framing, set a new tiled pan, and installed a Mr-Glass frameless enclosure cut to the measured opening, with new hinges and a proper sweep. The door closes flat now, and the floor stays dry. That’s the difference between measuring and assuming, and in Buena Park it’s the whole job.
Mr-Glass Models & Products We Service in Buena Park
We install and service the Mr-Glass Frameless Sliding Shower Doors (Challenger and similar slider series), the Semi-Frameless Hinged Shower Enclosures, the Frameless Neo-Angle Corner Shower Enclosures, and the Custom-Cut Frameless Enclosure Panels. For parts, we source Mr-Glass hardware and seals first. Where OEM pieces are slow or discontinued, we use quality-matched aftermarket hinges, sweeps, and vinyl rollers that match the original spec. We keep common roller kits, sweeps, and hinge sets in rotation so a Buena Park or Mr-Glass repair in Cypress doesn’t wait on a warehouse across the country. The right material in the right place. Everything else is just catching up to that decision.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Buena Park
| Service | Typical Price Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives the cost on a Buena Park Mr-Glass job: how far out of square the opening is (and whether we need to reframe or resquare the curb), what shape the wall backing is in, whether the pan or tile needs to be replaced first, and which Mr-Glass model you’re putting in. A straight enclosure swap on a sound opening runs toward the low end. A tub-to-shower conversion on a 1950s bathroom with rotted curb framing runs toward the high end. Every estimate is line-itemed, free, and specific to the house we’re actually standing in. Call (866) 253-8554 to schedule one.
Serving Buena Park, CA — Our Local Coverage Area
We’re based in the Buena Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Buena Park
Yes, in most cases. We measure the actual opening, square the curb and wall framing where needed, and order or cut the Mr-Glass panel to the measured dimensions – not to a nominal size. The enclosure is fitted to the house, not the other way around. The exception is when the opening is so far out or the backing is so compromised that reframing is the only structurally sound option. Call (866) 253-8554 and we’ll tell you which camp you’re in after a site measure.
On Buena Park homes, it’s usually a worn sweep combined with a track that’s settled out of level. The door travels unevenly, the sweep tears, and water escapes. We replace the sweep, re-level and resecure the track, and inspect the rollers. If the rollers are flattened, we replace those too. It’s a same-day fix in most cases. Call (866) 253-8554 for an exact diagnosis.
They do. The dry heat and wind evaporate water quickly, leaving mineral residue baked onto glass and chrome frames. Over time that etches the glass and dulls the metal. The best defense is a squeegee after each use and keeping the bathroom vented during Santa Ana season. If the etching has already set in, we’ll let you know whether restoration or replacement is the smarter spend.
Yes, and it’s one of the most common jobs we do in 90620 and 90621. These bathrooms are small, so we usually pull the tub, waterproof the alcove properly, set a tiled pan, and install a Mr-Glass frameless enclosure cut to the opening. The result is a walk-in shower that uses the same footprint more efficiently. Call (866) 253-8554 for a free estimate on your specific bathroom.
No, we’re an independent contractor – not affiliated with, authorized by, or endorsed by Mr-Glass. We service the product line because we know it well and it fits Buena Park houses. As for warranty: Mr-Glass product warranties rest with the manufacturer and are separate from installation. We install to spec and stand behind our own workmanship. If your enclosure is still under manufacturer warranty, we’ll help you understand what’s covered before any work starts.
Service Areas Near Buena Park
Our Mr-Glass service covers all of Buena Park service area – 90620, 90621, 90622, 90624 – and the surrounding cities. We regularly work in Fullerton, Anaheim, and Placentia. For clients on the north and west edges of Buena Park, we also handle Mr-Glass service in La Habra and Mr-Glass service in Stanton.
Book Your Mr-Glass Service in Buena Park Today
Call (866) 253-8554 to schedule your free estimate. We’ll measure the opening, check the framing and backing, and give you a written, line-itemed quote before any work starts. Buena Park jobs run on our calendar, not a warehouse’s.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Buena Park and North Orange County.