Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Cypress, CA | Elmwood Contractors
Elmwood Contractors provides independent Mr-Glass shower and glass enclosure installation and service across Cypress, CA, and Mr-Glass service in Buena Park, as part of full bath and kitchen remodel projects. The one thing that makes our Mr-Glass work different in Cypress is that we build the opening before we hang the glass, so enclosures fit flush against walls that were rarely plumb when these tract homes went up. We are not a manufacturer-authorized dealer. We’re the contractor Cypress homeowners call when a frameless enclosure needs to survive hard water, settled curbs, and original cast-iron drains. Call (866) 253-8554 for a free estimate.
Why Cypress Residents Choose Us for Mr-Glass Service
Most glass installers measure, order, and hang. We don’t start there. Before a Mr-Glass panel goes in, we check the framing, waterproofing, and drain condition behind it, because in Cypress’s 1950s and 1960s tract homes, those are the parts that fail first. Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood surrounded by late-60s construction, and he learned early which houses were going to have problems. That instinct carries into every Mr-Glass enclosure we install. We use OEM Mr-Glass rollers, hinges, handles, and seals when available, because the geometry of the track and pivot matches the original door. When an OEM part is discontinued, we fit a quality aftermarket equivalent rated for the door’s weight and verify alignment before we leave. The result is a glass enclosure that opens and closes properly five years from now, not just on install day.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Cypress
- Roller and track wear on sliding shower door kits. Cypress water is hard and mineral-heavy. Calcium builds up on Mr-Glass tracks, grit accumulates, and rollers flat-spot until the door drags or jumps. This is especially common in original 1950s and 60s tract baths where the shallow curb doesn’t give the track much protection. We replace worn rollers with OEM-style parts and re-align the track so the door rolls without fighting you.
- Silicone and seal failure at the wall jamb. Mild wet winters plus daily shower humidity cause caulk to shrink and pull away from the frame. Water wicks behind the Mr-Glass frame and stains the tile or drywall, while the glass itself stays perfectly sound. We strip the old sealant, dry the substrate, and re-seal with a product rated for continuous wet exposure.
- Out-of-square openings causing pivot and hinge misalignment. Original Cypress tract bathroom walls were rarely framed plumb, and decades of settling only made it worse. A Mr-Glass pivot door that binds or swings open on its own usually means the opening, not the hinge, is the problem. We re-frame or shim the opening before resetting the door.
- Tempered glass edge chipping from door slam or crumbly anchors. The glass is sound, but the mounting substrate behind it is not. Old tile backer in Cypress homes often crumbles around anchor points, leaving the panel loose and the edges vulnerable. We re-anchor into solid framing or replace the backer before remounting the glass.
- Leaks at the curb on tub-to-shower conversions. Cast-iron drains and original curbs in Cypress tract homes weren’t designed for the water volume of a modern walk-in shower. We rebuild the curb, re-waterproof the pan, and set the Mr-Glass enclosure on a surface that drains properly instead of pooling.
Mr-Glass Service in Cypress: What Local Conditions Mean for Your Equipment
Cypress’s strict code enforcement on visible front-yard improvements pushes most of our Mr-Glass work into the interior of homes built between 1955 and 1970, where what’s behind the wall matters more than the glass itself. On a 1962 single-story tract home near the Los Alamitos school district side of Cypress, we converted a cast-iron-drained tub alcove to a walk-in shower with a frameless Mr-Glass enclosure. The original wall was nearly an inch out of plumb, so we re-framed and re-waterproofed the opening, set the curb level, and templated the glass to the corrected dimensions before installing OEM-style rollers and hinges. The homeowner got a door that closes flush and a shower pan that drains without pooling. That’s the Cypress reality: enclosures here have to be templated on site, not ordered from a stock size, because no two of these tract baths measure the same.
Mr-Glass Models & Products We Service in Cypress
We work across the Mr-Glass lineup Cypress homeowners actually have: frameless sliding shower door kits in barn-style and single-roller series, framed and semi-frameless pivot shower doors, fixed glass panels and custom-cut frameless enclosures, and mirrored closet and vanity glass components. Our repair-versus-replace rule is simple. If the glass is sound, we repair the hardware and re-seal. We only recommend a full replacement when the tempered panel is chipped, the frame is corroded through, or the opening can’t be brought back to plumb without re-framing. We keep common OEM Mr-Glass rollers, hinges, and seals on hand so most Mr-Glass sales & service calls in Cypress wrap up in one visit.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Cypress
What you’ll pay depends on the scope, and here are the numbers we quote Cypress homeowners:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
The biggest cost drivers in Cypress are what’s behind the glass: re-framing out-of-square walls, replacing cast-iron drain lines that fail inspection, and re-waterproofing old tile backer. Our free estimate includes a written line-item breakdown so you know exactly what the framing, waterproofing, and Mr-Glass installation each cost before any work starts. Call (866) 253-8554 to schedule yours.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Cypress
Yes, and in most Cypress homes that’s the right call. If the tempered glass panel is sound and the frame isn’t corroded through, we replace the rollers, hinges, handles, or seals with OEM Mr-Glass parts and re-align the door. A full enclosure replacement is only necessary when the glass is chipped, the frame is rusted out, or the opening needs re-framing to sit plumb. Call (866) 253-8554 and we’ll tell you which one your situation needs.
Hard, mineral-heavy Cypress water leaves calcium on the track, and grit accumulates until the rollers flat-spot and the door starts dragging or jumping. It’s not the glass failing, it’s the rolling hardware. We clean the track, replace the worn rollers with OEM-style Mr-Glass parts, and re-align the door so it rolls smoothly. If it’s been dragging for a while, call (866) 253-8554 for an inspection before the track itself gets grooved.
Often, yes. The framed walls in 1950s and 60s Cypress tract homes were rarely plumb when built, and settling has made the out-of-square worse. A frameless Mr-Glass enclosure demands a nearly perfect opening, so we check the framing before ordering glass. If the wall is off by more than a fraction of an inch, we re-frame or shim it first so the glass fits flush and the door closes without binding.
That leak is almost always silicone failure at the wall jamb. Cypress’s mild wet winters and daily shower humidity cause caulk to shrink and pull away, letting water wick behind the Mr-Glass frame. We strip the old sealant, dry the substrate, and re-seal with a product rated for continuous wet exposure. Ignoring it means stained tile or rotted drywall behind the frame, so call (866) 253-8554 as soon as you see the gap.
Yes, and this is one of the most common projects we do in Cypress. The cast-iron drain needs to be inspected and often replaced with PVC to handle modern shower water volume. We rebuild the curb, re-waterproof the pan, and template the Mr-Glass enclosure to the corrected opening, with the same precision we bring to our Garden Grove Mr-Glass service. The result is a walk-in shower that drains properly and a glass enclosure that closes flush. Call (866) 253-8554 for an exact quote on your conversion.
Service Areas Near Cypress
We serve Cypress and the surrounding North Orange County cities, including Cypress service area, Fullerton, Anaheim, Buena Park, and La Habra. If you’re in a neighboring community, we also provide Mr-Glass service in Villa Park and Mr-Glass service in Westminster. Our trucks are already in the area most weeks, so scheduling is straightforward.
Book Your Mr-Glass Service in Cypress Today
If your Mr-Glass shower door is dragging, leaking, or just not closing flush, call (866) 253-8554. We’ll schedule a free estimate, check the framing and waterproofing behind the glass, and give you a written quote with named brands and line-item pricing. The right material in the right place. Everything else is just catching up to that decision.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Cypress since the company’s founding.