Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Fontana, CA | Elmwood Contractors
We install, repair, and replace Tremron paver driveways, patios, and segmental retaining walls across Fontana. The thing that sets our Tremron work apart here is simple: we know how these Florida-made pavers behave under Fontana’s 100°F-plus summers, Santa Ana wind scour, and alkaline irrigation water. Because we’re an independent contractor, not a Tremron dealer, we match color lots and thickness tolerances from regional suppliers and install to spec without pushing you toward a single product line. If your Tremron pavers are rutting, efflorescing, or walking on a failed base, call (866) 253-8554 for a straight assessment and a free estimate.
Why Fontana Residents Choose Us for Tremron Service
We’ve set Tremron pavers and wall units on hundreds of Inland Empire properties, and through our General Contractor in Fontana, we’ve seen what five or ten years of Fontana heat does to a joint-sand field. Nolan Shepherd, who runs Elmwood Contractors, learned construction the hard way in Orange County’s late-’60s tract housing, then spent two decades building our reputation for flat paver fields and plumb wall lines. That background matters when a Tremron driveway in the south side’s older grid is heaving because the original base was never compacted for Fontana’s thermal cycling. We name the paver, the joint sand, and the base aggregate before the contract is signed. For Tremron work, we use genuine Tremron units matched to your existing color lot, paired with a Class II base and polymeric sand that holds up to wind and wash-down. No mystery material. No box-store filler.
And because we’re a single-source general contractor, a Tremron patio or driveway isn’t a standalone bid. We coordinate the full exterior scope: pavers, concrete, fencing, roofing, drainage. One plan, one point of contact. That’s how we work across Fontana service area.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Fontana
- Efflorescence blooming across gray-cement pavers. Fontana’s water is alkaline and mineral-heavy. When homeowners wash down driveways or run irrigation near paver edges, those minerals wick up through the concrete and leave a white, chalky haze. We clean the surface and, where possible, adjust drainage so the problem doesn’t return three months later.
- Tumbled-edge pavers walking and rutting on driveways. The Olde Towne line has that soft, tumbled edge people love, but those relaxed joints shed sand fast under Santa Ana wind and 100°F-plus expansion cycles. Once joint sand washes out, pavers shift under vehicle load. We re-sand with a high-grade polymeric product and re-cut the border course so the field locks back together.
- Color fading and surface dusting on older Tremron pavers. East of the Cajon Pass, UV exposure is relentless. Tremron pavers installed a decade ago can look chalky and washed out from years of direct sun. When the field is sound, we deep-clean and apply a breathable sealer. When units are spalled, we replace the affected course with a matched color lot.
- Segmental retaining-wall bulging on tract-home slope walls. In Fontana’s 1980s and 2000s subdivisions, we find Mega Olde Towne wall blocks leaning out where the original installer skipped geogrid or drainage behind the wall. We tear out the bowed section, rebuild with proper grid and drain rock, and set the existing blocks back if they’re still sound.
- Heaved paver fields on failed bases. Fontana’s dry summers bake the ground, then winter rains hit. A base that wasn’t compacted in lifts will settle unevenly. We see this most often on older south-side driveways, where the original base was sand over native soil. We remove the affected area, re-compact a Class II base, and reset the pavers flat.
Tremron Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana is a logistics and warehouse town. The I-10 and I-210 corridors are lined with distribution centers, truck courts, and dock aprons, and that industrial buildout shapes how hardscape work gets done here. Our Tremron crews regularly pivot from a residential paver driveway in 92337 to a truck-court apron where base compaction and load ratings are the whole job. A paver field that handles a minivan will fail fast under a 40,000-pound trailer if the base isn’t engineered for it. That’s not a lesson you learn in a coastal suburb. It’s a Fontana reality, and it’s why we compact in lifts and verify base depth before a single Tremron paver goes down. The right material in the right place. Everything else is just catching up to that decision.
Over in the older tract grid near ZIP 92335, we tore out a heaved, sand-starved Tremron Olde Towne driveway where the original base had failed under years of summer heat and wash-down, then brought in our Rialto Tremron service expertise to fix it right. We reset the pavers over a re-compacted Class II base, re-cut the border course, and locked it in with polymeric joint sand. The homeowner got a flat, re-sanded drive without paying to replace the entire field.
Tremron Models & Products We Service in Fontana
We work with the Tremron lines that show up most often across Fontana: Olde Towne pavers in the tumbled 60mm profile, Mega Olde Towne wall block, the Plaza Series and Plaza Antique pavers, and Stonegate and Chesapeake slab pavers. When your project needs new units, we source genuine Tremron from regional hardscape suppliers and match your existing color lot and dimensions. If you’re unsure which line you have, we’ll identify it on site. For repairs, we don’t patch cosmetically. Cracked, spalled, or heaved units get pulled and replaced with a matched course. We stock a working supply of polymeric sand, base aggregate, and edging restraint so most Fontana jobs don’t wait on material runs. Our broader Tremron work is described on the Tremron sales & service page.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Fontana
Here’s what Fontana homeowners can expect for Glen Avon Tremron service and other Tremron-related hardscape work. Every job gets priced after we measure the area, check the base, and confirm your paver line.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
What drives the number: base condition, square footage, paver line, and whether we’re replacing a failed base or installing fresh. A free estimate from us includes a site walk, base check, and a written line-item quote. Call (866) 253-8554 and we’ll get you scheduled.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Fontana
No. We’re an independent contractor who installs and repairs Tremron products. We’re not sponsored, warrantied, or authorized by Tremron, and we won’t imply otherwise. What we offer is field experience with their product lines across Fontana and the Inland Empire, plus the ability to source genuine Tremron units to match your existing pavers. For manufacturer warranty claims, you’d work through Tremron directly or an authorized dealer. For installation and repair work, we’re your crew.
Genuine Tremron, matched to your color lot and dimensions. We source from regional hardscape suppliers who stock Florida-made Tremron units. When a field is sound but sand-starved, we repair and re-sand. When blocks are cracked, spalled, or heaved, we replace the affected course with matched Tremron units rather than patch with a mismatched paver. Call (866) 253-8554 and we’ll identify your line on site.
Most driveway re-sanding and border re-cutting jobs finish in one to two days. A full base rebuild on a failed section typically runs three to five days, depending on square footage and access. Fontana’s summer heat sometimes pushes us to start at first light, which keeps the polymeric sand from setting too fast. We’ll give you a straight timeline when we walk the site.
It compresses the work window. Polymeric joint sand sets fast in 100°F-plus surface heat, so we schedule set-sand work for early morning and avoid midday pours. Extreme heat also makes pavers expand, which is why proper joint spacing matters more here than near the coast. We account for that in every Fontana install. Call (866) 253-8554 for an assessment.
Olde Towne and Mega Olde Towne show up constantly in Fontana’s 1980s – 2000s subdivisions, and our Pedley Tremron service covers them all. We also see Plaza Series and Plaza Antique on patios, and Stonegate and Chesapeake slabs on newer driveways. If we can’t identify your line from photos, we’ll match it on site from a paving sample.
Service Areas Near Fontana
We serve Fontana and the surrounding Inland Empire communities, including Rancho Cucamonga, Rialto, Bloomington, and Ontario. For Tremron-specific work in adjacent areas, see our Tremron service in Woodcrest and Tremron service in Bloomington pages.
Book Your Tremron Service in Fontana Today
If your Tremron driveway is rutting, your wall block is leaning, or you’re ready to price a new paver patio, call (866) 253-8554. We’ll walk the site, check the base, and give you a written line-item estimate. Fontana projects get scheduled fast, and we’ll tell you exactly which materials go into the job before anything is signed.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Fontana and the Inland Empire.