Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Irvine, CA | Elmwood Contractors
We install and repair Jerith in Tustin and throughout Irvine, handling aluminum and vinyl fence and railing systems, and the single thing that sets our work apart here is that we read each village’s CC&Rs before we order a single panel. Elmwood Contractors is an independent Jerith installer and repair crew, not a Jerith-authorized or partnered contractor, which means we source OEM hardware when the extrusion match matters and quality aftermarket parts when OEM is slow. Call (866) 253-8554 for a free estimate on Jerith service in Irvine.
Why Irvine Residents Choose Us for Jerith Service
We work on Jerith products because we know the fabrication specs and the failure points, not because a supplier pays us to push them. Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood where half the houses on his street were built in the late ’60s, and he learned early which materials held up to Southern California heat cycles and which ones came back as callbacks. That background drives how we approach Jerith repair in Aliso Viejo and installations in Irvine: we confirm the HOA submittal, verify the extrusion profile, and set posts deep enough that a Santa Ana event won’t leave your gate sagging by October.
Our Irvine customers also appreciate that we’re a single-source general contractor with Jerith sales & service experience that sits alongside the rest of our exterior and interior trades. When your fence and your roofline both need attention, you’re not juggling two phone numbers and two schedules.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Irvine
- Powder-coat chalking and fade on sun-facing runs. Irvine’s dry Santa Ana wind seasons and near-zero rain for months at a stretch punish exposed powder coat. South-facing and west-facing Jerith panels in Woodbridge and Northwood can chalk noticeably within a few years. We powder-match touch-up and, when the finish is too far gone, replace panels with the exact approved color.
- Post-base failures in shallow, rocky Irvine soil. Jerith posts set short in Irvine’s compacted, sometimes rocky ground lose their grip under wind load and gate cycling. Panels rack, gates sag, and latches stop aligning. We reset galvanized footings to depth and re-plumb the posts before re-hanging the section.
- Gate hinge and latch wear at pool and side-yard entries. Irvine homes pack a lot of fence into tight lots, and pool-code gates see constant cycling. Jerith aluminum gate hardware drifts out of striker alignment, usually before the hinge itself fails. We replace worn OEM hinges and realign latches so the gate closes and latches without a shoulder bump.
- Fastener corrosion where sprinkler overspray keeps aluminum wet. Irvine’s automatic irrigation runs on short cycles through dry months, and overspray where Jerith aluminum sits against dissimilar metals accelerates corrosion at panel-to-rail fasteners. We swap in coated fasteners and isolate the contact point.
- HOA rejection of a fence that’s already on a neighbor’s yard. This one catches out-of-town installers every time. Irvine’s villages review against the original architectural palette, and an approved neighbor upgrade is not a precedent. We confirm the submittal before ordering powder-coated panels.
Jerith Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine is a master-planned city built mostly after 1970 by the Irvine Company, and that means construction here doesn’t just run through city code. It runs through village-specific CC&Rs and an architectural review process that looks at your fence, railing, and gate against the original design palette for your village. Woodbridge differs from Northwood, and Northwood differs from Great Park. An out-of-town crew can install a perfectly code-compliant Jerith fence and get red-tagged because the powder-coat color deviates from the approved palette, even when a neighbor’s identical upgrade was already signed off. That specific reality shapes our whole approach to Jerith work in Irvine: we confirm the village submittal before ordering, we match the approved profile and height, and we build the install schedule around HOA sign-off, not around when the panels show up. In Turtle Rock, for example, we replaced a run of faded Jerith aluminum ornamental fence along a slope-side side yard where the original footings sat shallow and the panels had racked. We reset galvanized posts to depth, matched the approved powder-coat, and reused the sound top rail. The HOA signed off on the finish before we ordered panels.
Jerith Models & Products We Service in Irvine
We service the full Jerith residential lineup: aluminum ornamental fence in the Signature and Baron series, chain-link and pool-code fencing with powder-coated frames, vinyl privacy fence including Chesterfield-style panel systems, and aluminum railing and gate hardware for HOA guardrails. On parts, our stance is straightforward. Where the exact extrusion match matters, we source Jerith OEM gate hardware, post caps, and rail profiles. Where OEM is slow or discontinued, we use quality aftermarket fasteners and powder-matched touch-up that holds up to Irvine’s sun. We repair and realign a sound but faded run or a racked gate rather than pushing a full replacement. That’s the right call for the homeowner and usually for the HOA review as well.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Irvine
Jerith fence and railing pricing in Irvine runs with the scope of the run, the profile you’re matching, and whether we’re repairing or replacing. Here’s what we quote against:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Roof Repair | $400 – $1,800 |
What drives cost in Irvine and Jerith service in Santa Ana specifically is the HOA review and the palette match. A fence that needs a custom powder-coat to match a discontinued village color costs more than a stock black or bronze. A slope-side run with deep post work costs more than a flat side yard. Our free estimate is a written line-item quote and we don’t change the number once the HOA has signed off. Call (866) 253-8554 to schedule yours.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Irvine
Not necessarily. Irvine’s architectural review approves against the village’s original palette, not against what a neighbor already got signed off. We confirm the submittal for your specific village before ordering powder-coated panels. Call (866) 253-8554 and we’ll walk through the process for your street.
Yes, when the posts are set deep enough. Jerith aluminum is light and the pickets are rigid, but a Santa Ana event will find a shallow post. In Irvine’s compacted, rocky soil we set galvanized footings deeper than the standard spec on exposed or slope-side runs and we re-plumb any post that’s moved, the same way we handle North Tustin Jerith service.
In most cases, yes. If the run is sound but the finish is chalking, we powder-match touch-up. If a gate is racked, we reset the posts and realign the hinges and striker. We replace the full run only when the pickets or rails are structurally compromised or the extrusion has failed. Call (866) 253-8554 for a repair assessment – estimates are free.
Most standard Irvine side-yard or backyard runs install within two to three working days once the HOA signs off and the powder-coated panels arrive. Slope-side work or runs with a lot of post replacement take longer. We sequence the work so we’re not holding up your yard while a review drags on.
Yes, that’s exactly what we do. Elmwood Contractors is a Irvine service area general contractor that coordinates exterior work under one plan, so a Jerith fence replacement and a roof repair on the same property run under one schedule and one point of contact. Call (866) 253-8554 to get both priced together.
Service Areas Near Irvine
We provide Jerith service across Irvine and into Fullerton, Anaheim, Placentia, Brea, and Buena Park. If you’re in Jerith service in Huntington Beach or Jerith service in Costa Mesa, our crews cover those markets too. The HOA rules change by city and by village, and we read the right rules for the address before we quote.
Book Your Jerith Service in Irvine Today
If you need Jerith fence or railing work in Irvine, call (866) 253-8554. We’ll confirm your village’s review requirements, spec the right panels and hardware, and give you a written quote before anything gets ordered. The right material in the right place. Everything else is just catching up to that decision.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Irvine since day one of his general contracting career.