Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Fullerton, CA | Elmwood Contractors
We provide independent Jerith fence installation and repair across Fullerton, from the historic districts near downtown to the 1950s tracts off Commonwealth. What makes our Jerith work different here is that we know how these aluminum panels behave against Fullerton’s older stucco-over-frame houses, sloped post-war lots, and properties where garage conversions changed the fence line years before anyone pulled a permit. Call (866) 253-8554 for a free estimate on Jerith fence work, General Contractor – Fullerton services like driveway concrete, or paver patios. Nolan Shepherd grew up in Sunny Hills and has spent two decades keeping Fullerton homes from developing the failures most contractors never catch.
Why Fullerton Residents Choose Us for Jerith Service
We’ve installed and repaired Jerith ornamental aluminum fencing across Fullerton’s older tracts and historic-district properties for long enough to know how these panels actually hold up, not just how they look in a catalog. The Westminster, Georgetown, Lexington, and Majestic lines all share the same aluminum construction, but how they fail in Fullerton depends on where they’re set. Post bases poured into cracked, patched 1960s concrete behave differently than posts set in fresh footings. Nolan grew up walking these streets, and by the time he was a teenager he could already point out which houses were going to have foundation problems. That same eye now catches a Jerith gate that’s about to sag before it does. We are an independent Jerith installer and are not authorized, sponsored, or endorsed by Jerith. Our recommendations come from field work on Fullerton lots, not from a manufacturer playbook.
We stock OEM Jerith replacement panels, posts, pickets, and gate hardware for common Fullerton repairs, and we keep quality US-made aftermarket hinges, latches, and caps on hand for when OEM lead times stretch. For broader project work, see our Jerith sales & service page.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Fullerton
- Leaning pickets and sagging gates from failed post footings. Fullerton’s older homes often have patched concrete aprons and original footings from the 1950s and 60s. The Santa Ana heat bakes the concrete, winter rain wicks into the cracks, and the post bases corrode and loosen. We re-set posts in new footings rather than shimming a lean that will return.
- Powder coat chipping at gate latches and hinge points. South- and west-facing Jerith runs take the brunt of Fullerton’s sun. Years of UV exposure make the powder coat chip at friction points, opening bare aluminum to oxidation spots. We replace worn hardware and touch up affected sections before the corrosion spreads.
- Gates binding and hinge screws wallowing out on sloped lots. Lots near Hillcrest and Commonwealth often slope enough that rackable panels get forced square. When installers do that, gates bind and hinge screws strip. We re-hang gates and re-pitch panels so they move clean.
- Fence lines out of plumb against adjusted property lines. Unpermitted garage conversions and additions surface at permit time and shift where the fence legally sits. We re-survey against city records and re-set Jerith sections so they match the as-built conditions, not the old fence line.
- Loose or mismatched sections after a partial repair. A previous handyman patch using the wrong panel profile leaves visible gaps and weak joints. We match the exact Jerith model and rework the run so it reads as one continuous fence, not a patchwork.
Jerith Service in Fullerton: What Local Conditions Mean for Your Equipment
Fullerton’s historic downtown and the older neighborhoods around Hillcrest and Commonwealth carry a specific burden: unpermitted prior additions and converted garages that only surface when someone pulls a permit. That matters for Jerith fence work because the fence line is rarely where the original plat says it is. A homeowner might have converted a detached garage in the 1980s, extended a wall, and moved the fence to match, all without city sign-off. When we come in for a new Jerith Westminster or Georgetown run, the first question is not where the old posts are, it’s where the city says the property line sits. We’ve re-set entire fence runs six inches inside the old line because an as-built survey showed the garage conversion sitting inside the setback. On a 1950s single-story tract house off Commonwealth near the older downtown tracts, we pulled a leaning Jerith Westminster run where the original post footings had been poured into cracked, patched concrete and the gate no longer latched. We reset posts with proper footings, replaced two rackable panels forced square on the sloped lot, and swapped in new OEM hinges and a latch. The run came back plumb and the gate closed clean while we reconciled the yard line with the as-built conditions on file. That is Fullerton work: you are not just installing a fence, you are reconciling the physical condition of the lot against what the city has on record.
Jerith Models & Products We Service in Fullerton
We service and install the full Jerith residential lineup: Westminster, Georgetown, Lexington, and Majestic systems, including gates, rackable panels, and railings. When an existing run needs repair, we use Jerith OEM replacement panels and hardware to match the profile and finish. When OEM lead times stretch beyond what a Fullerton homeowner should have to wait, we turn to US-made aftermarket hinges, latches, and post caps that meet or exceed the original spec. We repair and re-set sound Jerith sections before recommending replacement. A full replacement only makes sense when the powder coat is failing across most of the run or the footings are degrading beyond economical rework. The right material in the right place. Everything else is just catching up to that decision.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Fullerton
Jerith fence work in Fullerton is priced by the linear foot, but the real cost drivers are what’s already in the ground: footing condition, slope, access, and whether the old fence line matches the legal one. Here are the ranges we quote most often in Fullerton:
| Service | Fullerton Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Paver Patio Installation | $3,500 – $11,000 |
We work across the full scope of a Fullerton home project, from Jerith fence lines to Home Remodeling – Fullerton projects like paver driveways and patios. Our free estimate includes a site walk, measurements, and a written line-item quote naming the exact Jerith model and hardware going in. Call (866) 253-8554 to schedule yours.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Fullerton
No. Elmwood Contractors is an independent Jerith installer serving Fullerton. We are not authorized, sponsored, or endorsed by Jerith. What we bring is field experience with Jerith products on Fullerton’s older lots and historic-district properties, plus access to OEM parts and proven US-made aftermarket hardware.
We use Jerith OEM replacement panels, posts, pickets, and gate hardware when matching an existing run. When OEM lead times stretch, we use quality US-made aftermarket hinges, latches, and post caps that meet or exceed the original spec. We never install mismatched panel profiles that leave visible gaps.
We install and repair the Westminster, Georgetown, Lexington, and Majestic aluminum fence and railing lines. That includes gates, rackable panels, post resets, hinge and latch replacement, and full runs on new construction, remodels, and ADU projects.
Most Fullerton Jerith fence installations take two to four working days from post excavation to final gate adjustment, assuming good access and no permit conflicts. Jobs on sloped lots near Hillcrest or Commonwealth, or where a fence line has to be reconciled against a garage conversion and city records, can add a day or two. Call (866) 253-8554 for a timeline specific to your property, estimates are free.
A leaning Jerith fence in Fullerton usually costs between $400 and $1,800 to repair, depending on how many posts need to be re-set and whether gate hardware is failing. If the powder coat is failing across most of the run, a partial rework may not be worth it. Call (866) 253-8554 and we’ll tell you honestly whether repair or replacement makes more sense on your lot.
Service Areas Near Fullerton
We serve Fullerton and the surrounding North Orange County communities, including Jerith service in Anaheim, Jerith service in Placentia, Brea, Buena Park, and La Habra. Our Fullerton service area covers the historic districts, the Commonwealth corridor, and the tracts around Cal State Fullerton.
Book Your Jerith Service in Fullerton Today
If you’re planning Jerith fence work, a concrete driveway, or a paver patio in Fullerton, call (866) 253-8554 to schedule your free estimate. We’ll walk the lot, check what’s in the ground, and name every product going into the job before the contract is signed.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Fullerton since the early 2000s.