Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in Irvine, CA | Elmwood Contractors
Toto service in Irvine means handling bathrooms in homes built in tight village phases, often with the original Drake or Ultramax still in the wall. We’re Elmwood Contractors, and we provide independent Toto fixture service across Irvine: sales, installation, repair, and the shower and vanity work that usually goes with a toilet swap. We are not authorized by Toto, and that’s a distinction we’re upfront about. What we bring instead is two decades of setting, servicing, and building around Toto fixtures in Irvine’s specific housing stock. Call (866) 253-8554 for a free estimate.
Why Irvine Residents Choose Us for Toto Service
Plenty of plumbers can replace a fill valve. Fewer can tell you why your Toto Drake keeps rocking on a Woodbridge slab, what that means for the closet flange beneath the new tile, and whether the HOA is going to have anything to say about the vanity you want next to it. That’s the work we do.
Nolan Shepherd runs Elmwood Contractors. He grew up in Fullerton’s Sunny Hills neighborhood and spent his twenties on residential and light commercial ground-up work across North Orange County. The houses he learned on were late-’60s builds, many with the same slab and rough-in quirks we still correct in Irvine and North Tustin Toto service calls today. The team brings that same eye to every Toto fixture: we check the flange, the supply stop, the GFCI situation, and the rough-in before we set anything new.
We use genuine Toto OEM fill valves, flush towers, gaskets, and seat hinges on anything still worth keeping. Quality aftermarket parts only where the OEM part is discontinued. When a bowl is cracked or a Neorest control board is gone, we say so plainly. We don’t sell a rebuild that won’t hold.
Styles & brands we work with







Common Toto Construction Problems We Solve in Irvine
- Fill valves and flush towers scaling or sticking from Irvine’s hard imported Colorado River water. This shows up most in townhomes and mid-rise multifamily around the Spectrum and UCI, where the original Toto internals have been fighting mineral buildup for years. The fix is usually an OEM fill valve and a flush tower, not a whole new toilet. We stock those parts for fast turnaround across Irvine.
- Wax-ring seepage and rocking bases on slab floors. In the 1970s and ’80s Woodbridge and Northwood baths, the original closet flange was often set for the era’s flooring height. Add new tile and the flange sits proud or low, the bowl rocks, and the wax ring gives out. We reset the flange to finished-floor height before we set a new Drake or Ultramax II.
- Washlet and Neorest electronics failing early because no GFCI outlet existed near the toilet. Tract homes from the ’80s and ’90s put the only bathroom receptacle across the room at the vanity. A Washlet S550e needs power at the toilet. We add the GFCI circuit as part of the install, not as an afterthought.
- Glaze wear and seat and hinge cracking on original builder Drakes in Turtle Rock and Westpark. Homes there are at the 40 – 50 year mark. The toilet often still works, but the seat won’t stay put and the glaze is gone. Replacement with a current Drake or Aquia usually makes more sense than chasing parts.
- Failed supply stops behind the bowl. Same age bracket, same story: the original angle stop is frozen open and won’t shut down. We swap it before it strands a homeowner mid-repair.
Toto Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine’s villages were built in tight 5 – 10 year phases, so entire tracts hit the same failure point at once. A row of Woodbridge or Northwood baths all have original builder Toto toilets reaching end of life together. That’s why our Toto fixture-and-vanity scopes stack neatly street by street. It also means the HOA architectural review can still reject a color or material change that doesn’t match the village’s original palette. You can’t just swap a white Drake for a black Neorest in Woodbridge and assume nobody cares. We know the local review standards well enough to flag that risk before you spend money.
Toto Models & Products We Service in Irvine
We work on the full range you actually find in Irvine homes: original builder Drakes and Drake IIs, one-piece Ultramax and Ultramax II units, Aquia dual-flush models, plus Washlet seats from the C100 and S550e series and Neorest integrated units. Our parts approach is simple. Genuine Toto OEM parts for anything under factory coverage or worth saving. Aftermarket only where Toto has discontinued the part. For most Irvine service calls, we’re replacing a fill valve, flush tower, gasket set, or seat hinge, and we keep those on hand for same-day work. For a full Toto sales & service scope, we’ll bring options to the estimate.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in Irvine
Toto work here often comes bundled with the surrounding bathroom scope. A toilet swap is rarely just a toilet swap once the flange and GFCI get involved. Here are the ranges we quote most often in Irvine:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9000 – $28000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Bathroom Vanity Installation | $800 – $3000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
What drives the number for Toto work specifically: whether the flange needs resetting, whether we’re adding a GFCI circuit, and whether the fixture is a repair or a replacement. A free estimate from us includes a written line item for each. Call (866) 253-8554 and we’ll walk the bathroom with you.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well, including Toto service in Santa Ana and nearby cities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in Irvine
Interior plumbing fixture swaps generally don’t require HOA review in Irvine, because the architectural standards govern what’s visible from the street or from common areas. A bathroom remodel that changes plumbing location, window openings, or exterior vent placement can trigger review. If your project touches an exterior wall, we coordinate the paperwork before work starts. Call (866) 253-8554 if you’re unsure whether your scope needs it.
Irvine’s water is imported Colorado River water, which is hard and mineral-heavy. It leaves scale on fill valves and flush towers faster than many other Southern California systems. The permanent fix is an OEM fill valve and, in repeat-scale homes, a whole-house softener. We can also swap in a chlorine-tolerant valve seat that handles Irvine’s water chemistry better than the original.
Yes. Most Irvine tract homes from the ’80s and ’90s only have a receptacle at the vanity, across the room from the toilet. We run a dedicated GFCI circuit to the wall behind the toilet as part of the Washlet or Neorest install. It’s the correct way to do it, and it’s what the fixture manufacturer expects.
If the bowl and glaze are in good shape and the only issue is a fill valve or flapper, repair makes sense. If the base has been rocking, the wax ring’s been weeping, or the seat hinges have torn the plastic, replacement with a current Drake, Ultramax II, or Aquia is usually cheaper long-term. We’ll tell you which side your units fall on before we quote anything. Call (866) 253-8554 for an exact number.
We handle the entire bathroom scope. That’s the whole premise of our business. We set the Toto fixture, reset the flange, run the GFCI circuit, then frame the walk-in shower, hang the vanity, and set the countertop. One contractor, one project plan, one point of accountability. On a Woodbridge townhome off West Yale Loop, our crew pulled the original builder Toto Drake from a hall bath and found the closet flange sitting nearly a quarter-inch below the new tile, the toilet rocking and weeping for years. We reset the flange to finished-floor height, set a new Drake with a fresh wax ring and OEM fill valve, and added the GFCI outlet the family needed before we hung the new vanity and framed the walk-in shower glass. The right material in the right place. Everything else is just catching up to that decision.
Service Areas Near Irvine
We run Toto service across Irvine service area and into the cities next door. Toto service in Huntington Beach often comes from Irvine homeowners with a second property or a remodel staged in a coastal home. Toto service in Costa Mesa covers the older slab-on-grade housing stock just north. We also work Fullerton, Anaheim, and Buena Park for clients who know our Toto work from Irvine projects.
Book Your Toto Service in Irvine Today
Call (866) 253-8554 to schedule a free estimate. We’ll walk your bathroom, check the flange and the electrical, and give you a written number for the Toto work and whatever shower or vanity scope goes with it.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Irvine’s planned villages and the surrounding Orange County area with Toto fixture service and full bathroom construction, including Toto repair in Aliso Viejo.