Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Midway City, CA | Elmwood Contractors
We service, repair, and install KraftMaid cabinetry throughout Midway City as an independent provider. Most of our KraftMaid work here starts with one of two problems: thermofoil peeling from Prelude doors, or water and termite damage eating through sink bases in 1950s and ’60s ranch kitchens. Because Midway City is unincorporated Orange County, any cabinet work that moves a wall or changes plumbing runs through OC Public Works, not a city counter, and we handle that sequencing from the first site visit. Call (866) 253-8554 to have us look at your boxes. We’re Elmwood Contractors, and we know which KraftMaid repairs hold up in this climate.
Why Midway City Residents Choose Us for KraftMaid Service
KraftMaid didn’t flood this ZIP code by accident. 92655 is dense with postwar tracts and ranch homes that got semi-custom kitchen upgrades in the ’90s and 2000s, and thousands of those boxes are now 20 to 30 years old. We see the same failure modes across Midway City again and again: delaminated thermofoil, sink bases spongy from slow leaks, and face frames pulling away from walls that settled decades ago. Nolan Shepherd, our owner, grew up in Fullerton and spent years doing ground-up work across North Orange County before running Elmwood. He can tell you in the first five minutes whether a KraftMaid box is worth saving, and he won’t sugarcoat it if it isn’t. We’re not a box-store installer and we’re not manufacturer-affiliated. We’re a general contractor that specifies our KraftMaid services where it fits and repairs it where it doesn’t.
Styles & brands we work with







Common KraftMaid Construction Problems We Solve in Midway City
- Thermofoil delamination on Prelude and flat-panel doors. Midway City gets warm, dry summers with Santa Ana heat spikes, and the vinyl skin on older KraftMaid Prelude doors peels and curls along edges and drawer fronts. South- and west-facing kitchens with poor ventilation are always first to fail. We replace the fronts with OEM-painted doors or reface the run, not just glue the skin back down.
- Dry-rot and termite damage at toe kicks, sink bases, and cabinet bottoms. The 1950s and ’60s ranch stock around Midway City has wall cavities and under-sink penetrations that have leaked slowly for years. When you open a sink base and the bottom panel crumbles, that’s the pattern. We rebuild the box or reframe the base, replace the damaged sections, then address the moisture source so the next cabinet doesn’t follow.
- Face-frame separation and door sag on semi-custom boxes. Infill additions and ADU conversions are common on Midway City’s small lots, and new framing meeting 60-year-old structure rarely lines up plumb. KraftMaid face frames pull away, and doors hang crooked within a year. We refasten frames, shim correctly, and rehang doors so they close true.
- Painted finish cracking and yellowing near range hoods. Small galley kitchens in Midway City tract homes were built with undersized ventilation. Years of heat and grease break down the lacquer on raised-panel Keyline doors. We color-match and refinish or replace the affected fronts.
- Rusted drawer slides and failed soft-close hardware. Coastal-inland humidity here isn’t Gulf Coast bad, but it’s enough to seize cheap factory slides over two decades. We swap in aftermarket soft-close slides and drawer boxes where the OEM part is discontinued or backordered.
KraftMaid Service in Midway City: What Local Conditions Mean for Your Equipment
Midway City is a small, unincorporated Orange County island wedged between Huntington Beach, Westminster, and Fountain Valley. Nearly all construction here is infill, additions, ADUs, and tear-down rebuilds on tiny lots rather than new subdivisions. For KraftMaid owners, that changes everything about how cabinet work gets done. Because Midway City routes permits through Orange County’s building department and OC Public Works rather than a city hall, a cabinet replacement or kitchen bump-out that shifts a wall line triggers a plan-check and county inspector sequence, not a city permit. Cabinet layout, structural tie-ins, and inspection timing have to be set in the same plan from the start. On a 1962 ranch near the Huntington Beach-Westminster edge of Midway City, we tore out a water-damaged KraftMaid Keyline sink base and refaced the remaining shaker run, replacing delaminated thermofoil doors with OEM-painted fronts and adding a new soft-close drawer box where the original slides had rusted. The layout had to keep the existing inspection path under OC Public Works, so we confirmed cabinet anchor points and wall openings before the county inspector walked the rough-in. Out-of-area builders who assume it’s a standard city permit get caught on that detail, and it costs them schedule time.
KraftMaid Models & Products We Service in Midway City
We work on the full KraftMaid line: Keyline series raised-panel and shaker painted finishes from the ’90s and 2000s tract upgrades, Custom Series semi-custom framed cabinetry with plywood box construction, Prelude series thermofoil and veneer flat-panel boxes, and Woodstar entry-level oak and maple boxes. Our parts approach is simple: OEM KraftMaid doors, drawer fronts, and hinge hardware for exact color and profile matches, and quality aftermarket soft-close and drawer-box hardware where the factory part is discontinued or backordered. Repairing a solid box is almost always the right call over replacement when the frame is straight and dry. We keep common hinge plates, clips, and drawer slides on hand for fast Midway City turnaround, and we can order OEM-fronted doors for color-critical kitchens without waiting on a full factory run.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Midway City
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the cost in Midway City is usually the scope of repair versus refacing versus full replacement, plus whether plumbing or wall work pushes the job into OC Public Works plan-check territory. Our free estimate includes a line-by-line breakdown of materials and labor, so you know what you’re paying for before anything starts. We name the brands going into your home before the contract is signed. Call (866) 253-8554 and we’ll come walk the kitchen, measure the boxes, and put numbers down on paper.
Serving Midway City, CA — Our Local Coverage Area
We’re based in the Midway City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Midway City
A straight reface and door swap on existing boxes generally doesn’t require a permit, because you aren’t changing walls, plumbing, or electrical. But if the reface is part of a larger kitchen remodel that moves a wall line, relocates the sink, or changes the layout, that work routes through OC Public Works because Midway City is unincorporated. We’ll tell you during the estimate whether your project crosses that line. Call (866) 253-8554 and we’ll walk the scope with you in person.
Thermofoil is a vinyl skin heat-bonded to an MDF or engineered wood core, and Midway City’s warm summers plus Santa Ana heat spikes cause that skin to expand and contract at a different rate than the core. South- and west-facing kitchens with poor ventilation are the first to delaminate along door edges and drawer fronts. Once the edge peels, moisture gets behind the vinyl and the failure accelerates. Replacing the fronts with OEM-painted doors is the long-term fix.
If the frames are straight and dry, yes. A solid KraftMaid box from the ’90s or 2000s has decades left in it, and repairing or refacing costs a fraction of full replacement. The calculation changes when the sink base is rotted, the boxes are twisted from settlement, or the layout no longer works for how you use the kitchen. We’ll give you an honest read on that during the estimate, and we’ll show you the numbers both ways. Call (866) 253-8554 to schedule a look.
We pull a door or drawer front sample and match against KraftMaid’s documented finish codes, then order OEM-painted fronts where the line is still available. Where a finish has been discontinued or has yellowed from heat and grease exposure, we color-match with a cabinet refinisher who works from the existing box, not a catalog swatch. That matters in older Midway City kitchens where sun exposure has shifted the tone on one run of cabinets but not another.
Yes. Many Midway City homes were built with side-yard setbacks under five feet, and garages sit at the rear of the lot. Cabinet deliveries that would be routine in newer subdivisions sometimes can’t get a material cart down the side yard here, which means we stage through the house or hand-carry through the garage. We plan that in advance, and we’ve worked through it on dozens of Midway City kitchens. If your lot is tight, tell us when you call, and we’ll build it into the schedule: (866) 253-8554.
Service Areas Near Midway City
We serve Midway City and the surrounding Orange County communities, including Huntington Beach, Westminster, Fountain Valley, Buena Park, and Fullerton. If you’re in Midway City proper, see our Midway City service area page. For KraftMaid cabinet work in the neighboring cities, check out KraftMaid service in Tustin and KraftMaid service in North Tustin. For a full overview of our capabilities, visit KraftMaid sales & service.
Book Your KraftMaid Service in Midway City Today
The right material in the right place. Everything else is just catching up to that decision. If your KraftMaid cabinets are peeling, sagging, or soaking up moisture, call (866) 253-8554 today and we’ll schedule a free estimate. We’ll measure the boxes, check the frames, and tell you exactly what it costs to fix them right.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Midway City and Orange County.