Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Home Remodeling Across Bloomington
Home remodeling in Bloomington, CA costs $14,000 – $45,000 for a typical whole-house scope, while a full home addition runs $45,000 – $130,000 depending on square footage and site conditions. Those are real numbers we quote every week here in the 92316, and they include the county permitting, wind-load compliance, and inspection sign-off work that a cheap bid quietly skips. If you’re planning a kitchen, bathroom, addition, or ADU conversion on one of Bloomington’s older large-lot properties, call us at (866) 253-8554 for a written line-item estimate. We’re Elmwood Contractors, led by Nolan Shepherd, and we know how San Bernardino County builds here, not just how contractors build in general.
Why Elmwood Contractors Is Bloomington’s Preferred Home Remodeling Company
Bloomington homeowners keep calling us back because we name every brand in the bid before the contract is signed. No mystery materials. No “comparable product” substitutions. When we quote Kohler fixtures and James Hardie siding, that’s what arrives on the truck.
Our local reputation in Bloomington is built on a simple pattern: we pull county permits correctly the first time, schedule inspections around county Building and Safety timelines, and hand over a documented compliance packet when the job closes. That packet matters. It’s what lets a homeowner file a wind-damage insurance claim with confidence after a Santa Ana event, because the work was permitted, inspected, and signed off under the same county authority that reviews the claim.
We respond to Bloomington service calls from our Fullerton base, typically scheduling the first walkthrough within a few business days. Our Home Remodeling team works across the full scope, interior to exterior, so you’re not juggling three subcontractors and two different permit runners. One contractor, every trade.
Styles & brands we work with
Whole House Remodel in Bloomington
A Whole House Remodel in Bloomington typically means taking a mid-century single-story stucco home, the dominant housing type here, and reworking the interior layout, systems, and finishes without tearing it down. We see this constantly along the streets off Valley Blvd, where original 1950s and 1960s floor plans have small compartmentalized kitchens, one bath, and a carport that got enclosed at some point. The scope usually includes a kitchen gut and reconfiguration, bath remodel, flooring throughout, window replacement, and often structural corrections where earlier work was done without permits. A typical Whole House Remodel in Bloomington runs $14,000 – $45,000, with the county permit, wind-load roof work, and inspection scheduling included in that number from the start.
The first thing we do on every whole-house job here is check San Bernardino County’s records for the property’s permit history. It’s common to find that the original carport enclosure or a back-room addition was never permitted. We factor corrective work into the plan and the price up front, so you’re not surprised by a stop-work order mid-project.
Systems and Envelope Upgrades
Bloomington’s hot, dry summers and Santa Ana winds make roof sheathing, windows, and exterior finishes the quiet workhorses of a whole-house remodel. For homeowners needing ES Windows repair in Bloomington, we handle that as part of the exterior envelope scope. We upgrade roof sheathing to meet county wind-load requirements and specify impact-rated windows from PGT or CGI where the exposure calls for it.
Layout and Floor Plan Rework
Those original citrus-era homes weren’t built for how people live now. We open kitchens to living spaces, add a second bath where only one existed, and convert underused square footage into laundry or pantry space. The goal is function that fits the way your household actually uses the house.
Luxury Home Remodeling in Bloomington
Luxury Home Remodeling in Bloomington isn’t about adding square footage for the sake of it. It’s about building quality that fits the lot, the climate, and how you want to live on it. On Bloomington’s generous lots, we see homeowners investing $45,000 – $130,000 in additions, kitchen rebuilds with Cambria or Silestone surfaces, spa-level bath replacements, and exterior envelope upgrades that give the house another 40 years of low-maintenance life.
Our approach is material-agnostic. We carry parallel brand lines at multiple price tiers, so the recommendation you get is the right product for your budget and your exposure, not the one supplier we happen to have an account with. This matters more in Bloomington than people expect, because the unincorporated county rules and wind exposure here make certain product choices objectively better than others.
Kitchen and Primary Suite Builds
KraftMaid and Wellborn cabinetry, Caesarstone or Silestone countertops, and Kohler or Toto fixtures are where we usually start for clients who want durability and a 15-to-20-year horizon on the finishes. We lay out the full appliance and fixture schedule before any wall comes down.
Outdoor Living and Hardscape Integration
On larger Bloomington lots, luxury usually extends outside. Belgard paver driveways and patios, aluminum or vinyl fencing from Barrette, and full exterior lighting and drainage packages. We coordinate it all under the same project plan and the same county permit where the scope requires it.
Trusted Brands We Service in Bloomington
We’re not a brand installer, but we are brand-literate, and that’s a distinction that matters. In Bloomington we routinely work with Therma-Tru entry doors, ViewLux windows, Barrette fencing, and PGT impact-rated window lines because those products hold up to the heat, sun, and wind this specific area throws at them. We know the lead times, the warranty language, and the installation tolerances for each one. When we quote a Therma-Tru door against a less expensive alternative, we can tell you exactly what the hardware, weatherstripping, and frame build differences are, not just the price gap. For Bloomington customers, we stage materials at our Fullerton yard and coordinate delivery around county inspection dates so the job doesn’t stall waiting on a backordered window unit.
See the difference
Before
After
Before
After
Before
AfterCommon Home Remodeling Problems We See in Bloomington Homes
- Unpermitted carport enclosures and back-room additions. A huge share of the 1940s – 1970s homes here had work done off the books decades ago. When we open walls, we find undersized headers and non-compliant wiring that has to be corrected before county inspection will sign off.
- Wind-load-insufficient roof sheathing. Bloomington sits in San Bernardino County’s wind-designated zone, and roofs that were fine 40 years ago often don’t meet current nailing patterns and sheathing requirements. A cheap remodel bid that doesn’t touch the roof deck leaves the homeowner exposed.
- Flat-lot drainage issues surfacing after rain. Bloomington’s flat, sandy lots handle the rare winter rains poorly when grading was done cheaply or never done. The first real rain after a remodel reveals ponding against the slab or foundation erosion that should have been addressed in the original scope.
- Agricultural-era utilities blocking new foundation lines. Old septic lines, abandoned wells, and undocumented drain runs show up the moment we trench for a foundation or a footing. We flag the likelihood in the estimate and carry a contingency line so the first quote isn’t a fiction.
Pricing for Home Remodeling in Bloomington, CA
Here’s what Bloomington homeowners should expect to budget, based on county permits, local labor, and brand-specified materials:
| Project | Bloomington Price Range |
|---|---|
| Whole House Remodel | $14,000 – $45,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Replacement | $8,000 – $20,000 |
| Impact Window Installation | $8,000 – $25,000 |
A whole-house scope at the low end typically means a smaller 1950s home with a galley kitchen refresh, one bath update, flooring, and paint, while the high end buys you a full gut on a larger lot with custom cabinetry, high-end stone, and exterior envelope upgrades. What moves the number most in Bloomington is unpermitted prior work that has to be corrected and any roof sheathing that no longer meets county wind-load requirements. We’ll tell you exactly where your job lands in the range when we walk it. Call (866) 253-8554 to schedule a free estimate. You’ll get a written line-item bid, not a ballpark.
We Also Serve Cities Near Bloomington
Our crews work throughout Fontana, Rialto, Glen Avon, and Pedley, covering the same county Building and Safety processes and wind-load requirements that apply in Bloomington. If your remodel sits just over the line into an incorporated city, the permitting path changes, and we’ll tell you exactly how before you sign anything. Home Remodeling in Bloomington is our backyard, but we’re running jobs across the whole Inland Empire every week.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Home Remodeling in Bloomington
Bloomington is unincorporated San Bernardino County, so every remodel permit, plan check, inspection, and sign-off runs through county Building and Safety, not a city hall. There is no Bloomington city building department to go to. That means county plan reviewers, county inspectors, and county timelines govern your project from the day you file to the day you get final sign-off. It also means the permit history and compliance record for your property lives with the county, which has implications for insurance claims and future sales. Call (866) 253-8554 and we’ll walk you through the specific county requirements for your scope.
San Bernardino County requires roof sheathing, nailing patterns, and roof-to-wall connections to meet the current wind-load design values for the unincorporated area, which exceed what many original 1950s and 1960s Bloomington roofs were built with. If your remodel scope touches the roof deck, the county will require upgraded sheathing and fastener schedules before they’ll sign off on the rough inspection. A compliant quote includes that roof work up front. One that doesn’t is pricing a job the county won’t pass. We’ll show you the exact sheathing spec and nailing pattern we’re quoting so you can compare bids honestly.
Documented compliance is the difference between a claim that gets paid and a claim that gets denied after a Santa Ana event tears up a Bloomington roof. When your remodel included county-permitted wind-load upgrades, you have the permit records, inspection sign-offs, and material specs to show the insurer that the damage wasn’t pre-existing neglect. We hand every Bloomington client a compliance packet at close-out for exactly this reason. On a citrus-era street off Valley Blvd, our crew remodeled a 1950s single-story stucco home where the original carport had been enclosed without permits. We pulled county permits for the whole-house scope, corrected the load-bearing header, upgraded the roof sheathing to meet wind-load requirements, and scheduled inspection sign-off before hanging drywall. The homeowner later used our documented compliance packet to support a wind-damage insurance claim after a Santa Ana event. Call (866) 253-8554 if you want to know how that works for your property.
A compliant Bloomington remodeling quote includes county permit fees, plan check time, inspection scheduling, wind-load-rated roof work, and any corrective scope for unpermitted prior work. A cheap one leaves those line items out and prices only the pretty finishes. Then the first county inspection fails, the change order arrives, and the low bid isn’t low anymore. We write our quotes as full line items, not allowances, so you see the permit line, the structural line, and the roofing line separated from the cabinetry and the tile. That’s the only honest way to compare two bids in an unincorporated county.
Yes, and it’s a significant portion of the work we do here. Most 1940s – 1970s Bloomington homes have at least one unpermitted element: a carport enclosure, a back-room addition, a converted garage. The county will require those conditions to be corrected and permitted as part of the new scope, which means beams sized to code, electrical brought up to current standards, and sometimes foundation upgrades. We handle the entire correction and permit path, and we price the corrective work into the original estimate. That’s the whole point of working with a contractor who knows how unincorporated San Bernardino County actually operates.
If you’re planning a remodel on a Bloomington lot, start with a contractor who knows the county process, the wind-load requirements, and what a compliant bid actually looks like. Call Elmwood Contractors at (866) 253-8554 for a free, written, line-item estimate. We name every brand, every permit, and every number before you sign.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Bloomington and the surrounding Inland Empire.