Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Perris, CA | Elmwood Contractors
We’re Elmwood Contractors, an independent construction crew that installs and repairs Belgard pavers, walls, and porcelain across Perris. We’re not affiliated with Belgard or any manufacturer. What makes our Belgard work different here is simple: Perris sits on expansive clay and straddles the San Jacinto Fault zone, so we build paver bases deeper and with geotextile separation that most installers skip. If you need Belgard work done right in 92570, 92571, 92572, or 92599, call (866) 253-8554 for a free estimate.
Why Perris Residents Choose Us for Belgard Service
Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood watching late-60s tract homes develop foundation problems. That early education in Southern California soil behavior stuck. He spent his twenties doing ground-up residential and light commercial work across North Orange County, and for the past two decades he’s run Elmwood Contractors with one rule: the right material in the right place. Everything else is just catching up to that decision.
We specify Belgard products when they genuinely fit the site, not because we’re locked into a supplier. We know which Belgard lines hold up under Perris heat cycles and which need extra base work on expansive clay. We name the brands going into your home before the contract is signed. And we coordinate the whole job, from base course to edge restraint, under one project plan.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Perris
- Rocking pavers and opening joints. Lafitt Rustic Slab pavers shift when the base was set over shrinking Perris expansive clay without a compacted aggregate section and geotextile separator. We lift the field, rebuild the base properly, and re-set with OEM edge restraint.
- Efflorescence and salt bloom on gray pavers. Perris triple-digit summers wick moisture through the slab after irrigation cycling, leaving white mineral deposits on Belgard’s gray tones. We correct drainage and use the right joint sand to slow the bloom.
- Edge restraint failure on driveways. Class II base gets undercut at patio perimeters on sloping Perris lots, letting pavers creep and chip along the border. We over-ex the edge, re-compact, and install Belgard-compatible restraint so the border stays true.
- Spalling and lost joint sand on south/west exposures. High-UV exposure bakes polymeric sand applied too dry, and it fails within a season. We re-sand with the correct moisture content and match Belgard’s compatible joint-sand systems.
- Base failure under driveways. When a base fails under a driveway’s worth of pavers, lifting and re-setting individual units won’t last. We replace the base course honestly and re-lay the full field.
Belgard Service in Perris: What Local Conditions Mean for Your Equipment
Perris sits at the transition between Inland Empire sprawl and active seismic/soil hazards. The city straddles the San Jacinto Fault zone and has pockets of expansive clay that would not concern a crew in Menifee or Moreno Valley. On a 92570 ranchette off the old Perris Valley farmland, our crew pulled up abandoned irrigation pipe and a buried concrete footing while excavating for a Belgard Lafitt Rustic Slab patio. That forced us to over-ex the section, rebuild on a compacted Class II base with geotextile, re-set the Lafitt field with OEM edge restraint, and grade the patio so it drains away from the house through the seasonal wet corridor. Contractors digging on old Perris Valley agricultural parcels in 92570 regularly hit this kind of buried debris. New-build crews on Inland Empire tract land elsewhere don’t.
Belgard Models & Products We Service in Perris
We install and repair Belgard Lafitt Rustic Slab pavers, Catalina Grana pavers, Brighton wall block, and Dimensions slab pavers. For repairs we use Belgard OEM matching units and their compatible restraint and joint-sand systems so the fix blends into the running bond. Where aftermarket base aggregate and geotextile outperform, we pull those instead. Our Belgard sales & service work in Perris covers full paver driveways, patios, walkways, and retaining walls. If a failure is isolated to a low-traffic patio, we lift and re-set the affected field rather than tearing out the whole installation.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Perris
What drives cost is base condition, site access, and the Belgard line you choose. Here are the ranges we quote across Perris:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Every free estimate includes a site walk, a written line-item quote, and a base-course plan specific to your soil. No vague allowances. Call (866) 253-8554 to schedule yours.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Perris
Because the base was set over Perris expansive clay without a compacted aggregate section and geotextile separator. Clay shrinks and swells with moisture, which moves the base and opens joints. We rebuild the base and re-set the field. Call (866) 253-8554 for an exact quote. Estimates are free.
Yes, when installed with the right base and proper joint-sand moisture. High heat alone won’t fail a paver. Efflorescence and sun-baked joint sand are the real issues, and both are installation problems we correct.
Usually yes. We over-ex the section to pull buried concrete, irrigation pipe, and debris, then rebuild on a compacted Class II base with geotextile. We did exactly that on a ranchette off the old Perris Valley farmland, and the driveway drains clean through the wet corridor.
Perris straddles the San Jacinto Fault zone and has expansive clay pockets. We spec a deeper, geotextile-separated engineered base here that we would not need in Menifee or Moreno Valley. The same patio costs a bit more in Perris because the base work is heavier. Call (866) 253-8554 for a line-item quote.
Belgard Brighton wall block is our go-to for Perris retaining walls. It handles the lateral pressure and heat cycling without spalling. We combine it with proper drainage behind the wall and OEM-compatible caps.
Service Areas Near Perris
We serve Perris and the surrounding Inland Empire. That includes Menifee, Moreno Valley, Lake Elsinore, Murrieta, and Temecula. We also handle Belgard work in Quail Valley and Wildomar. For the full Perris service area, we cover all four ZIP codes: 92570, 92571, 92572, and 92599.
Book Your Belgard Service in Perris Today
We’re an independent Belgard crew that knows Perris soil and heat. Call (866) 253-8554 for a free estimate. We’ll walk the site, check the base, and give you a written quote before any work starts.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Perris since 2005.