Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Westminster, CA | Elmwood Contractors
We provide independent CGI cabinetry installation, refacing, and full kitchen remodeling across Westminster’s 92683, 92684, and 92685 ZIP codes. What makes our CGI work different here is that we know the houses: the 1950s and 60s tract ranches along Bolsa Avenue and Brookhurst Street where a third of the kitchens we open up have somebody’s unpermitted handiwork hiding behind the cabinet run. Call (866) 253-8554 for a free estimate, and we’ll tell you straight whether your CGI project is a cabinet job or a structural correction wearing cabinet clothes.
Why Westminster Residents Choose Us for CGI Service
We’ve spent years remodeling kitchens and baths around CGI cabinetry and surfacing, more than any CGI service in Huntington Beach, so we know exactly how their door styles, box construction, and finish options hold up in Westminster’s mixed housing stock. Because we’re independent, we can recommend the right CGI line for your layout without being locked into a single dealer’s inventory. If a Lausanne door makes sense for your south-facing wall and an Expressions box is the right call for the island, we’ll tell you why, line by line. Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood and has spent twenty years running Elmwood Contractors across North Orange County. He’s seen enough 1960s tract homes to know which ones are going to fight you the moment you level a base cabinet.
We name the brands going into your home before the contract is signed. For Westminster homeowners, that usually means CGI doors, drawers, and hardware spec’d against the actual humidity and heat cycles of coastal-inland Orange County, not a showroom in another state. You can learn more about our CGI sales & service approach across every project we run.
Styles & brands we work with
Common CGI Construction Problems We Solve in Westminster
- Thermofoil peeling on south-facing kitchen walls. Westminster’s marine layer keeps mornings damp, then the afternoon sun bakes the stucco. CGI thermofoil doors on south and west walls take that moisture-heat cycle year after year. We see delamination starting at the door edges and bottom rails. We replace the affected doors and check the cabinet clearance that caused the heat buildup in the first place.
- Box sagging and drawer-glide failure over unlevel 1950s slab floors. These older Westminster slabs have settled. When a prior remodel shimmed a CGI base cabinet run with wood scraps and drywall screws, the weight eventually wins. Drawers bind, glides strip, and the face frame pulls out of square. We pull the run, correct the floor pitch, and reset the boxes true before touching the finish work.
- Water damage at toe kicks behind aging dishwashers. A lot of Westminster homes have second kitchens added into former garages or utility rooms. The dishwasher line gets tapped into a drain that was never vented properly, and the slow leak soaks the cabinet bottom for months before anyone notices. By the time we’re called, the toe kick is swollen and the box is compromised. We repair or replace the cabinet, then fix the plumbing so it doesn’t happen again.
- Finish cracking around sink bases in tight galley layouts. The original Westminster galley kitchens were built tight. When someone crams a deeper sink into a CGI cabinet that was never sized for it, the face frame cracks around the sink opening and the finish follows. We sometimes recommend a re-face with a different door style rather than a full replacement, especially when the box itself is still sound.
- Cabinets blocking old garage door headers in converted units. South of Bolsa, this shows up constantly. Somebody converted the garage into a second unit, ran a CGI cabinet line across the back wall, and cut through the header to make room. The cabinet is fine. The wall isn’t. We handle the structural fix first, then set the cabinets properly. More on that below.
CGI Service in Westminster: What Local Conditions Mean for Your Equipment
South of Bolsa Avenue, many CGI kitchens sit inside garages that were converted to second units without permits. We routinely open a wall to find a cabinet run blocking the old garage door header and no proper shear transfer. That means the cabinet job becomes a structural correction before a single box goes in. This is not a problem you’ll run into the same way with CGI in Garden Grove or Fountain Valley. Westminster’s post-1975 Little Saigon rebuild produced thousands of multi-generational family compounds where the original 1950s ranch got an added kitchen, an added bath, and a converted garage. The cabinets went in fast. The permits didn’t. So when we quote a CGI remodel in the tracts south of Bolsa, we’re looking at the wall framing behind the cabinets as closely as we’re looking at the door finish. As Nolan puts it: the right material in the right place. Everything else is just catching up to that decision.
For a broader look at where we work, see our Westminster service area page.
CGI Models & Products We Service in Westminster
We work across CGI’s current and legacy lines. That includes the Lausanne and Summit door styles, the full-overlay wood and thermofoil options, and the Allure and Expressions series for value-focused full kitchen remodels. We also coordinate CGI quartz and granite countertop programs alongside their cabinet lines, so the surfacing and the boxes match from the same project plan. For parts, we source genuine CGI replacement doors, drawers, and hardware when you’re matching an existing kitchen. When a hinge style has been discontinued or the OEM price makes no sense on a twenty-year-old box, we use quality aftermarket glides and hinges that match the original reveal. We’ll tell you honestly if a CGI box is worth re-facing versus replacing, because half the battle in these older Westminster homes is correcting what the last remodel left behind.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Westminster
Here’s what CGI kitchen work runs in Westminster. These are project-total ranges, not per-door prices. The spread depends on how much correction work we’re doing behind the cabinets.
| Service | Westminster Price Range |
|---|---|
| Full Kitchen Remodeling (CGI cabinetry, quartz, layout) | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost with a Westminster General Contractor is what’s behind the wall. A clean 1960s kitchen with straight framing and a level slab sits at the low end. A converted garage with a cut header, sloped floor, and a second kitchen added without a permit lands at the high end, because we’re doing structural and permitting work before the cabinets go in. Every estimate is free and written as a line-item quote, so you can see exactly where the money goes. Call (866) 253-8554 to schedule yours.
Serving Westminster, CA — Our Local Coverage Area
We’re based in the Westminster area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Westminster
Yes, when the door style is still in production or we can source the discontinued style through our parts channels. CGI’s Lausanne and Summit lines have been around long enough that matching is usually straightforward for doors and drawer fronts. If the finish has yellowed from years of Westminster sun, we’ll talk about whether a full re-face makes more sense than chasing a perfect match. Call (866) 253-8554 and we’ll tell you what’s realistic before you spend anything.
Most likely yes. Westminster’s post-1975 pattern of garage-to-second-kitchen conversions means many of those changes were never permitted, and the city expects corrections when you’re doing structural work on the same walls. If the old garage door header was cut, if the floor was never leveled, or if the electrical and plumbing were run without inspection, we pull the permits and bring the work up to code before the new cabinets go in. We handle the full permit process as part of the job. Call (866) 253-8554 for an exact scope and quote.
The marine layer is the bigger enemy than the wind. Morning dampness followed by hot afternoon sun puts thermofoil finishes through a daily expansion-contraction cycle, and the doors on south and west walls show it first. Wood and painted finishes handle it better when the cabinets are installed with proper clearance from heat sources. The Santa Ana winds mostly matter for dust getting into hinges and glides, which is minor but worth noting if you’re near open fields or the older tracts off Bolsa. We spec the finish and door style for your wall orientation, not just your aesthetic.
Yes. As a general contractor we coordinate the whole interior in one plan, so the kitchen and the bath get sequenced without two crews fighting over the same hallway, unlike a typical Stanton CGI service. The kitchen usually goes first if you need the space functional, then the shower comes second. Or the other way around. One point of contact either way, and we name every brand before the contract is signed. Call (866) 253-8554 to talk through the order of operations.
A cabinet run blocking the old garage door header in a converted garage, with no shear transfer and a floor that was never leveled. We’ve pulled more than one of those apart on jobs off Brookhurst Street. The cabinets look fine from the front. The wall behind them is doing nothing structural. We correct it, then set the cabinets right. It’s the single most common reason a Westminster kitchen quote changes after we open the wall.
Service Areas Near Westminster
We run CGI kitchen projects across Westminster and the surrounding cities. You’ll find us working in CGI service in Santa Ana, in CGI service in Midway City, and in Fullerton, Anaheim, Placentia, Brea, Buena Park, and La Habra. The tract housing and common failure modes don’t change much across these neighborhoods, which means we know what we’re walking into before we knock on the door.
Book Your CGI Service in Westminster Today
If your CGI kitchen is showing its age, or you’re planning a full remodel and want it done right in Westminster, call (866) 253-8554. The estimate is free, the quote is line-itemed, and you’ll know exactly which brands are going into your home before the contract is signed.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Westminster and North Orange County since 2004.