Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Colton, CA | Elmwood Contractors
CGI kitchen and bath work in Colton usually falls into one of two camps: cabinets that have racked on sloping mid-century floors, or thermofoil doors that have baked in Inland Empire heat. We’re an independent CGI sales & service provider, not a manufacturer affiliate, and we handle both problems with the same approach: reface and re-box when the frames are sound, replace only when the carcass is compromised. Our CGI work runs through 92324, and we stock OEM-compatible doors, drawer fronts, and hardware locally so a Colton kitchen doesn’t sit torn apart longer than it needs to. Call (866) 253-8554 for a free estimate.
Why Colton Residents Choose Us for CGI Service
Most contractors in Colton treat cabinet work as a side note. We don’t. Nolan Shepherd, Elmwood’s owner, grew up in Fullerton’s Sunny Hills neighborhood where half the houses on his street were built in the late ’60s, and by the time he was a teenager he already knew which ones were going to have foundation problems. That early education in mid-century framing stuck with him. It’s why we look at a CGI kitchen in Colton differently than someone who only sees a cabinet line and a price sheet.
We’ve installed and remodeled around CGI Ready-to-Assemble shaker cabinets, their semi-custom painted and thermofoil lines, and their quartz and granite countertop program in enough Colton tract homes to know exactly where they hold up and where they don’t. That matters when you’re deciding between a $900 reface and a $9,000 replacement. We name the brands going into your home before the contract is signed, and we’ll tell you plainly when repair beats replacement. Our Highgrove CGI service and full coverage across the Inland Empire means we’re already stocked and already familiar with this product line, not figuring it out on your dime. One contractor, every trade – interior to exterior.
Styles & brands we work with
Common CGI Construction Problems We Solve in Colton
- Thermofoil and laminate door faces peeling at the edges. Colton’s intense summer heat bakes south- and west-facing kitchen walls, and thermofoil is the first casualty. The edge banding lifts, then moisture gets under the skin and the whole door face starts to look like bad wallpaper. We reface these doors with shaker-style fronts that don’t rely on a heat-sensitive laminate skin.
- RTA cabinet boxes racked out of square. CGI ready-to-assemble boxes are fine on a flat slab, but Colton’s 1950s – 1970s tract homes rarely have flat anything. We regularly find base runs that have twisted on sloping floors, so doors drag at the top and drawers bind at the bottom. The fix is re-leveling, re-shimming, and re-fastening the boxes before anything else gets installed.
- Swollen sink bases and toe kicks from slow leaks. Older homes near the historic core tend to have original supply lines and drain runs. A slow leak behind the sink base saturates particleboard and MDF cores long before you see water on the floor. We replace the damaged boxes with moisture-resistant material and fix the plumbing issue, not just the cabinet.
- Chalked and faded painted finishes near patio doors. Santa Ana wind events drive dust and grit against exposed exteriors, and that same grit finds its way into kitchens with patio-adjacent cabinetry. Painted CGI fronts lose their sheen fast under that abrasion. We spec finishes that hold up better to airborne sand and sun.
- Drawer slides and hinges that gave out years before the boxes did. CGI hardware was fine for its era, but aftermarket soft-close slides and modern hinges are a clear upgrade. We swap out the originals when they start to fail, and we don’t charge you for OEM loyalty when an aftermarket part does the job better.
CGI Service in Colton: What Local Conditions Mean for Your Equipment
Colton’s single-ZIP, older core means most CGI kitchen work here happens in 1950s – 1970s tract homes and downtown-area houses with nonstandard wall dimensions and original plumbing. That’s not the uniform new-build footprint you’d see in Fontana, and it’s not the sprawling ranch remodels of Riverside. The framing in these Colton homes was cut and set before laser levels and CAD drawings, so nothing is square, nothing is consistent, and every wall has a story it’s not sharing until you open it up. On a mid-century tract home off West Valley Boulevard near the old downtown core, we pulled a tired laminate kitchen and found the CGI in Grand Terrace and Colton RTA boxes had racked on a sloping 1960s floor, with thermofoil peeling off the sun-baked upper doors. We re-leveled and re-shimmed the base run, refaced the sound frames with new shaker doors, and set a quartz countertop over the existing footprint, all without tearing into the aging in-wall plumbing. That’s the difference between a contractor who knows Colton’s bones and one who quotes a cabinet swap from a showroom catalog. The right material in the right place. Everything else is just catching up to that decision.
CGI Models & Products We Service in Colton
We service the full CGI product range in Colton: their Ready-to-Assemble all-wood shaker cabinets, the semi-custom painted and thermofoil lines, the quartz and granite countertop program, and the vanity and bath cabinet lines. When you need a matching door or drawer front, we source OEM CGI pieces so the grain and color line up. When the hardware or hinge has failed, we don’t pretend an OEM replacement is sacred. We install aftermarket soft-close slides and modern hinges when they outperform the original at lower cost. Our recommendation is simple: reface and re-box sound CGI frames when the structure is solid, and only recommend full replacement when water damage or racking has compromised the carcass. We stock common CGI parts locally for faster Colton turnaround, and anything we don’t have, we can order without making you wait through a showroom chain.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Colton
What does CGI work actually cost in Colton? The ranges below reflect what we’ve seen across 92324 for jobs with local labor, permits where required, and materials drawn from the CGI and aftermarket lines we carry. The final number depends on how many boxes are salvageable, whether your floors need leveling, and whether the countertop is a simple replacement or a full re-fit around old plumbing.
| Service | Typical Colton Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
Every free estimate includes a line-item breakdown of cabinets, countertops, hardware, and labor, so you know exactly where the money goes before you sign. Call (866) 253-8554 for an exact quote. Estimates are free, and we’ll walk you through what’s worth fixing versus what’s worth replacing.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Colton
If the cabinet boxes are square and dry, refacing with new doors and drawer fronts is almost always the better move, and it runs far below the cost of full replacement. We only recommend new cabinets when the carcass itself is swollen, racked, or failing at the joints. Call (866) 253-8554 and we’ll check the boxes in person before we quote either path.
Colton’s housing stock is older and tighter than much of Riverside’s newer tracts, so the same CGI cabinet line sits inside homes with more direct sun exposure, more sloping floors, and older plumbing. A south-facing kitchen wall in a 1960s Colton tract home hits higher surface temperatures than a shaded Riverside remodel, and thermofoil doesn’t forgive that. The failures aren’t a brand defect as much as a climate match problem.
Yes, that’s most of the CGI work we do in Colton. We custom-fit, shim, and scribe the boxes to the actual wall, not the nominal measurement a stock cabinet assumes. The result is a kitchen that looks built for the house instead of dropped in from a big-box shelf.
No. Old supply lines behind a sink base are exactly where particleboard boxes fail first in Colton’s older homes. We address the plumbing behind the cabinet before we install anything, and we’ll tell you if the 1960s drain line needs replacement before it wrecks a new installation. A new kitchen should start with the problems fixed, not hidden.
Most Colton CGI kitchen remodels land between $14,000 and $45,000 depending on box count, countertop material, and how much reframing or leveling the house needs. Smaller partial remodels run $9,000 to $20,000. Call (866) 253-8554 for a fixed-price estimate with no change orders after the contract is signed.
Service Areas Near Colton
We handle CGI kitchen and bath work throughout Colton and the surrounding area, including Fullerton, Anaheim, Placentia, Brea, Buena Park, and La Habra. For homeowners in those cities, see our Colton service area page for coverage details, or reach out directly for scheduling. We also provide CGI service in Wrightwood and CGI service in March Air Force Base for clients across the Inland Empire.
Book Your CGI Service in Colton Today
If your CGI repair in Loma Linda or Colton kitchen is peeling, racked, or just tired, call (866) 253-8554 for a free estimate. We’ll measure, check the boxes, and tell you exactly what it’ll take to get it right. Same-week scheduling for most Colton jobs, free estimates on every job, and a written line-item quote before we start.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Colton and the Inland Empire.