Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Fullerton, CA | Elmwood Contractors
Elmwood Contractors provides independent CGI sales & service across Fullerton, and the thing that sets our CGI work apart here is simple: before we spec a single cabinet or countertop, we reconcile the as-built footprint with what’s actually on file at City Hall. Fullerton’s older tracts and historic districts carry decades of unpermitted additions and garage conversions, and that paperwork step reshapes kitchens more than any design preference ever will. Call us at (866) 253-8554 for a free estimate on CGI cabinetry, countertops, and full kitchen remodels.
Why Fullerton Residents Choose Us for CGI Service
We’ve installed and finished CGI cabinetry and countertops across our Fullerton service area and North Orange County long enough to know how their door styles, finishes, and cabinet lines actually hold up in Fullerton’s remodel-heavy housing stock. That matters because we’re independent, not a dealer with a sales quota. If a CGI thermofoil door won’t survive a south-facing wall during Santa Ana season, we’ll tell you before you pay for it.
Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood and knows exactly which late-60s tract houses were going to have foundation problems before he was old enough to drive. He learned the trade through Fullerton College’s construction technology program and spent his twenties doing Fullerton General Contractor work across North Orange County. That background means we spec CGI products to the room and the existing conditions, not to a catalog photo. We name the brands going into your home before the contract is signed.
Styles & brands we work with
Common CGI Construction Problems We Solve in Fullerton
- Peeling and blistering thermofoil doors on west- and south-facing walls. Fullerton’s Santa Ana wind events push dry heat against those exposures, and CGI’s flat-panel thermofoil finishes take the brunt of it. We see delamination at the door edges most often on kitchens along Commonwealth and the older tracts near Hillcrest.
- RTA cabinet boxes loosening at the cam-and-dowel joints. When a 1950s tract floor is half an inch out of level and the run goes in unshimmed, the boxes rack over time. We level and shim every base run before the doors go on, because the right material in the right place means nothing if the floor under it fights the cabinet.
- Swollen particleboard and MDF toe kicks from slow leaks. Fullerton’s slab foundations hide ice-maker and plumbing leaks until the cabinet core has already soaked it up. We cut out the damaged sections and rebuild with moisture-resistant materials where the leak history warrants it.
- Factory-finish doors that don’t match doors reordered years later. This is a running headache in Fullerton’s mixed remodels. A homeowner adds a pantry run three years after the original kitchen, and the new CGI door finish is a half-shade off. We handle finish matching and, where it’s too far gone, we’re honest about whether a full door-and-front swap makes more sense.
- Converted garages and unpermitted additions that surface at permit time. We’ve come across more than one Fullerton kitchen where the “breakfast nook” was a garage conversion that never made it onto city records. That changes the layout, the codework, and the cabinet order before product selection even starts.
CGI Service in Fullerton: What Local Conditions Mean for Your Equipment
Fullerton’s historic downtown and the older neighborhoods around Hillcrest frequently carry unpermitted prior additions and converted garages, so before we set a single CGI cabinet we often have to reconcile the as-built footprint with what City Hall has on file. That’s not a step most neighboring cities force on a kitchen remodel. In Anaheim or CGI service in La Habra, a kitchen is usually a kitchen. In Fullerton, the 1920s bungalow that’s had three owners and a 1970s garage conversion behind it might have a footprint that doesn’t match the assessor’s map, and that discrepancy changes where walls can go, what framing needs to be corrected, and how the CGI cabinet run gets laid out. We were called to a 1950s single-story tract house off Commonwealth where the kitchen had a garage conversion behind it that never made it onto the city records. Before templating new CGI quartz, our crew pulled the wall out to code-compliant framing, re-shimmed and leveled the floor so the CGI shaker boxes ran true, and finished with soft-close aftermarket slides. The homeowner ended up with a compliant, level kitchen and a clear paper trail instead of a surprise at resale.
CGI Models & Products We Service in Fullerton
We work with CGI’s ready-to-assemble kitchen and bath cabinetry lines, including their Euro-style flat-panel and shaker door styles. We template and install CGI quartz and granite countertop surfacing, and we fit CGI solid-surface and laminate vanity tops in Fullerton bathrooms. On parts, we use CGI’s own OEM hinges, drawer slides, and touch-up finishes so the warranty on the box and hardware stays intact, but we’ll substitute quality aftermarket soft-close slides and levelers where they outperform the stock spec. When a box has swelled or a finish has failed across a whole run, we’ll tell you honestly whether a partial door-and-front swap or a full replacement makes more sense for your budget.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Fullerton
Fullerton pricing for CGI work lands in these ranges, depending on the scope, the condition of the existing footprint, and which product line you select.
| Service | Fullerton Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number most in Fullerton is how much as-built reconciliation the job requires. A clean 1980s kitchen with a flat floor and current permits is a straightforward bid. A 1920s bungalow with a converted garage and three generations of unpermitted work runs higher because the framing, leveling, and paperwork all land in the same scope. Your free estimate includes a written line-item quote. Call (866) 253-8554 to schedule one.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Fullerton
Yes, and we do it before we order any product. Fullerton’s older homes around Hillcrest and the historic downtown frequently carry unpermitted additions and garage conversions that don’t match city records, and if the as-built footprint is off, the cabinet run gets laid out wrong. We pull the permit history and check the as-built against the assessor’s map first. Call (866) 253-8554 if you suspect your kitchen has a paperwork problem.
Thermofoil on a west or south wall in Fullerton takes the worst of the Santa Ana dry heat, and we’ve seen peeling and blistering on doors that have been there for five or six years. If your kitchen gets direct afternoon sun, we’ll tell you before you buy the flat-panel thermofoil line. A painted shaker door holds up better on those exposures, but the honest answer depends on your exact wall orientation and window placement.
They can, if the floor gets shimmed and leveled first. We’ve set CGI RTA boxes into CGI repair in Brea and 1950s tract houses off Commonwealth where the floor was ¾ inch out over an eight-foot run. The boxes go in shimmed, the toe kicks get scribed, and the doors hang true. Skip the leveling and the cam-and-dowel joints will loosen over time.
Refacing is real for CGI cabinets when the boxes are still square and dry. We replace the doors and drawer fronts, veneer the exposed frames to match, and swap the hinges and slides for OEM or better aftermarket hardware. If the box cores have swelled or the finish has failed across the whole run, full replacement is the honest recommendation, and we’ll tell you which one your budget actually favors.
No. Elmwood Contractors is an independent CGI service provider, not a manufacturer-authorized dealer. That independence is the point: we specify and fit CGI products to your room and your existing conditions, not to a dealer’s sales quota. We use OEM parts to keep the warranty intact, and aftermarket parts where they perform better. Call (866) 253-8554 for an exact quote on your Fullerton project.
Service Areas Near Fullerton
Elmwood Contractors serves Fullerton and the surrounding North Orange County communities, including CGI service in Anaheim, CGI service in Placentia, Brea, Buena Park, and La Habra. If your kitchen’s on the border of any of these, the same as-built reconciliation process applies.
Book Your CGI Service in Fullerton Today
If you’re planning a Fullerton kitchen remodel with CGI cabinetry or countertops, call (866) 253-8554 to schedule your free estimate. Nolan and the crew will walk the footprint, check what City Hall has on file, and give you a written line-item quote before you commit to anything.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Fullerton and North Orange County for over twenty years.