Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in San Bernardino, CA | Elmwood Contractors
We provide independent PGT service across San Bernardino, from impact-rated WinGuard installations to PGT service in Muscoy and re-glazing older vinyl units on 1940s-1970s tract homes. What makes our PGT work different here is simple: we’ve spent years replacing and re-glazing PGT vinyl units on San Bernardino’s wood-frame stucco tracts, so we know how the brand’s frame profiles and glazing behave under Santa Ana wind loads and 100°F-plus heat. We’re not manufacturer-affiliated or authorized. Our credibility is field-earned on this housing stock, not conferred by PGT. Call (866) 253-8554 for a free estimate on PGT window and door work anywhere in San Bernardino.
Why San Bernardino Residents Choose Us for PGT Service
Nolan Shepherd, our owner, grew up in Fullerton’s Sunny Hills neighborhood, where half the houses on his street were built in the late ’60s, and by the time he was a teenager, he already knew which ones were going to have problems. That early read on how tract housing ages carries into every PGT job we take, including PGT in Highland and across San Bernardino. We know which PGT frame profiles hold up under repeated thermal cycling, which glazing packages fail first, and which repair paths actually save money versus patching a unit that’s already done. Nolan picked up the fundamentals at Fullerton College’s construction technology program before spending the better part of his twenties on ground-up residential and light commercial work. For the past two decades he’s run Elmwood Contractors, and the standard hasn’t changed: framing that’s plumb the first time, material selections that hold up to Southern California’s heat cycles without callbacks. We carry OEM-compatible PGT parts, keep common glazing and roller sets ready for San Bernardino jobs, and show up with a plan rather than a guess.
We name the brands going into your home before the contract is signed. For PGT work, that means telling you exactly which sash, glazing package, and hardware set we’re installing, and why.
Styles & brands we work with
Common PGT Construction Problems We Solve in San Bernardino
- Seal failure and fogged glass on 1940s-1970s tract homes. Original single-pane and early dual-pane PGT vinyl units lose seal integrity under San Bernardino’s triple-digit summer heat. The insulating gas escapes, the panes fog between the glass, and low-E coatings cloud. We re-glaze units where the frame is still sound, or replace the sash when it isn’t.
- Santa Ana wind damage to glazing, sashes, and corner welds. Wind-driven debris pits and cracks PGT glazing, and sustained gusts stress vinyl sashes and frames, slowly working seams and corner welds loose. We see it most in the fall, and we inspect every unit after a hard wind event, not just the one the homeowner noticed.
- Flashing failure on pre-1950s downtown bungalows. Older San Bernardino bungalows retrofit with PGT units often show flashing failure at the head and sill where the original wood rough openings were never re-detailed. Wind-driven rain gets in. We rebuild the rough opening, re-flash, and set the unit properly before it becomes a water-damage claim.
- Hard-tracking sliding doors with gummed rollers and corroded tracks. Dust and heat take a toll on older PGT slider rollers and tracks. They gum up, corrode, and the door starts to bind, leaving air gaps at the weatherstripping. We replace rollers, clean and align tracks, and restore the seal.
- Single-pane original units near the mountain base. Homes at the wildland-urban interface often still have single-pane windows that weren’t designed for wind-borne debris. We replace those with PGT WinGuard impact-rated units, which changes both the safety and the insurance picture for the homeowner.
PGT Service in San Bernardino: What Local Conditions Mean for Your PGT Windows
San Bernardino sits at the base of the San Bernardino Mountains wildland-urban interface, and that fact alone changes how window specs get written here. Santa Ana wind events rip down through the passes, and fire-hardening requirements increasingly push window specifications toward impact-rated glazing, a specification pressure flat Orange County tracts don’t carry. We’ve seen this play out off Mount Vernon Avenue near Baseline and on jobs for PGT in Rialto, where a 1940s Spanish Colonial Revival bungalow still had original single-pane units paired with a failing Zinsco panel and 1940s galvanized plumbing. We re-flashed and set new PGT WinGuard impact vinyl windows into the rebuilt rough openings, coordinating with the panel upgrade and repipe so the permit passed in one inspection pass. That’s the San Bernardino difference: window replacement here is rarely just a swap. It’s tied to the home’s electrical, plumbing, and structural condition in ways a flatland city rarely asks for. The right material in the right place. Everything else is just catching up to that decision.
PGT Models & Products We Service in San Bernardino
We service the PGT lines most common across San Bernardino’s housing stock: PGT WinGuard impact-resistant vinyl windows and sliding glass doors, PGT Premiere vinyl single-hung and slider windows, the PGT Architectural series of vinyl windows and doors, and PGT SolarBroker and low-E insulated glass lines. Our parts approach is straightforward: we source OEM PGT glazing, sashes, rollers, and weatherstripping where the unit is serviceable, and we use quality aftermarket hardware only when OEM is unworkable. We keep common PGT glazing sizes and roller sets available for fast San Bernardino turnaround. If your frames and rough openings are still sound, repair and re-glaze is usually the right call. If the frames are warped or flashing is compromised, replacement is the honest answer, and we’ll tell you that before you spend a dollar.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in San Bernardino
PGT window and door work in San Bernardino follows the same cost drivers you’d expect anywhere in Southern California: unit size, impact-rated glazing requirements, and the condition of the rough opening. But here, the mountain-base wind exposure and older housing stock mean more homes need impact-rated glass and re-flashing work, which push jobs toward the upper end of the range. Here’s how it breaks down:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
A free estimate from us includes a look at every unit, the rough openings, and the flashing condition, not just a per-window price. Call (866) 253-8554 to schedule one. We’ll give you a written line-item quote so you know exactly what’s going in and what it costs.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in San Bernardino
Yes, and in many cases they’re becoming the required spec rather than an upgrade choice. Homes at the wildland-urban interface face wind-borne debris and fire-hardening pressure, and PGT WinGuard impact-rated units address both. Call (866) 253-8554 for a site assessment and an honest read on whether impact glass is necessary for your specific lot.
If the frame and rough opening are sound, re-glazing the sash with OEM PGT insulated glass is usually the less expensive fix, and we recommend it. If the frame is warped or the seal failure is paired with flashing problems, replacement is the honest call. We’ll tell you which applies to your unit after a free look. Call (866) 253-8554 to schedule one.
Leaks during hard wind events usually trace to flashing failures at the head and sill, especially on older San Bernardino homes where PGT units were retrofit into original wood rough openings that were never re-detailed. The fix is rebuilding the opening, re-flashing properly, and resetting the unit. That’s a job for a trained professional, not a caulk gun.
Yes, and we do it regularly in the older neighborhoods around downtown San Bernardino. The key is re-detailing the original wood rough openings and re-flashing before the new unit goes in. We’ve completed this work on Spanish Colonial Revival homes throughout the area, and the permit passes clean when the rough opening work is done right.
We do. Gummed rollers, corroded tracks, and hard-tracking doors are common on older PGT sliders in San Bernardino’s dusty, hot conditions. We replace rollers and weatherstripping with OEM parts where available, clean and realign the track, and restore the air seal. Call (866) 253-8554 for an exact quote, and estimates are free.
Service Areas Near San Bernardino
We serve San Bernardino and the surrounding Inland Empire communities. If you’re in Fullerton, Anaheim, Placentia, Brea, Buena Park, and La Habra, our San Bernardino service area team can reach you. We also provide PGT service in Loma Linda and PGT service in Moreno Valley, which positions us to handle PGT work across the region without a learning curve on your housing stock. For broader PGT questions, see our PGT sales & service page.
Book Your PGT Service in San Bernardino Today
PGT window and door problems don’t get better with another season of Santa Ana winds. Call (866) 253-8554 to schedule your free estimate. We’ll come out, inspect the units, give you a written line-item quote, and if it’s urgent, we’ll get you on the schedule fast.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving San Bernardino with PGT window and door expertise since 2003.