Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Bloomington, CA | Elmwood Contractors
PGT window and door work in Bloomington usually means repair or replacement on aging stucco homes, and we handle both as an independent Bloomington General Contractor. We’re not a manufacturer-authorized dealer, but we know how PGT vinyl and aluminum products actually behave after years of Inland Empire sun and Santa Ana wind. The difference here is the county. Bloomington is unincorporated, so any PGT work tied to an addition or ADU conversion runs through San Bernardino County permits, not a city building department. Call (866) 253-8554 for a free estimate on PGT windows, sliding doors, and impact-rated installations.
Why Bloomington Residents Choose Us for PGT Service
Most window contractors in the Inland Empire treat PGT as just another brand on the order sheet. We don’t. We’ve spent years pulling apart PGT WinGuard and VinylMax units on Bloomington homes, and we understand exactly where they fail under this specific climate. Nolan Shepherd, who runs Elmwood Contractors, grew up in Fullerton’s Sunny Hills neighborhood watching late-’60s houses develop the same problems Bloomington’s mid-century stock does: hairline stucco cracks, sun-baked window perimeters, and frames that shifted over flat, sandy ground. That early education stuck.
We stock a working inventory of PGT-compatible rollers, glazing gaskets, and weatherstripping so a sliding door repair on a Valley Blvd property doesn’t mean waiting two weeks for parts from a distributor. When we quote PGT work in Bloomington, we tell you which components are OEM and which are aftermarket, and why. Most customers never get that detail until the invoice arrives.
Styles & brands we work with







Common PGT Construction Problems We Solve in Bloomington
- Sun-brittled vinyl on south- and west-facing windows. Bloomington’s summer sun is relentless, and PGT vinyl extrusions on those exposures yellow and turn brittle over time. We see it most on 1960s and 70s single-story homes where windows have never been re-sealed. Often the frames are still structurally sound, and a re-glaze with new gaskets makes more sense than a full swap.
- Santa Ana wind-blown dust inside older PGT frames. When perimeter seals and glazing gaskets fail, wind-driven dust works its way into the frame channels and eventually onto your sill. A few windy weeks each fall will reveal exactly which windows have failing seals. We replace the gaskets and re-bed the glass, and the dust stays outside where it belongs.
- PGT aluminum sliding doors that stick or drag. The rollers under PGT aluminum sliders wear flat after years of grit and heat. Panels get heavy, tracks get scarred, and during Bloomington’s rare winter rain, water pools at the threshold. We replace rollers and re-align panels, and we’ll tell you honestly if the track itself is too far gone to justify the repair.
- Cracked stucco-to-frame sealant around PGT window perimeters. Bloomington’s 1940s – 70s stucco homes move with heat and soil shifts. The rigid sealant bead around a PGT window frame cracks, and water plus pests find a path in. We cut out the old bead, re-fill with a flexible sealant rated for Inland Empire temperature swings, and re-flash the opening when needed.
- Fogged double-pane glazing on older PGT units. The seal between panes eventually fails on any insulated window, and Bloomington’s heat accelerates it. When the fogging is in an otherwise healthy frame, we replace the glazing unit in place. When the frame itself shows heat damage, we give you a repair-versus-replace price before any work starts.
PGT Service in Bloomington: What Local Conditions Mean for Your Equipment
Here’s the thing that separates Bloomington PGT work from the same job in PGT repair in Fontana or Rialto: permits. The unincorporated status of ZIP 92316 means San Bernardino County Building and Safety reviews every new PGT opening connected to an addition, an ADU, or a garage conversion. City-issued permits don’t exist here because there’s no city hall issuing them. That changes how we sequence the work. On a garage-to-ADU conversion off Valley Blvd, we ordered the PGT WinGuard sliding door only after county egress review confirmed the rough opening and sill height. In a city job, that review flows through the city’s plan checker and can move on a different timeline. And the older the property, the more likely an agricultural-era well, septic line, or unpermitted add-on shows up once the first trench opens. We plan for that reality, because discovering it mid-project is the expensive way to learn it.
Nolan puts it simply: “The right material in the right place. Everything else is just catching up to that decision.” In Bloomington, that means specifying PGT glass packages and sealants for heat and wind, and sequencing county approvals before material orders.
PGT Models & Products We Service in Bloomington
We service the PGT lines most common on Inland Empire homes: WinGuard Impact Series vinyl windows, VinylMax single-hungs and sliders, the PGT Aluminum Series sliding glass doors, and WinGuard vinyl sliders. Our approach to parts is simple. Where PGT OEM components are still available, we use them. Where the manufacturer has discontinued a roller kit or gasket profile, we source quality aftermarket matches and tell you before installing. For Bloomington turnaround, we keep the most common PGT roller sizes, glazing gaskets, and weatherstripping profiles in our local stock, so a repair quote becomes a completed job instead of a parts wait. If the frame is heat-embrittled beyond safe re-use, replacement is the call.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Bloomington
What you pay for PGT work depends on scope: a single sliding door roller replacement is a few hundred dollars, while impact-rated window replacements on a whole house reach the upper end of the ranges below. Blumington’s older stucco openings sometimes need frame or flashing correction, and that’s visible on line-item pricing before you sign anything.
| Project Type | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
Our free estimate covers a site visit, frame and sealant assessment, and a written quote with labor and materials broken out. Call (866) 253-8554 to schedule one.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Bloomington
Yes, San Bernardino County permit review applies to PGT window and door work in Bloomington when openings are altered, expanded, or tied to an addition or ADU. Like-for-like replacement of an existing window typically falls under more routine review, but egress and energy-code checks still apply. We pull the permits and coordinate inspections. Call (866) 253-8554 for a project-specific answer.
Current PGT WinGuard and VinylMax units are built for high-UV and high-wind environments, and they hold up better than most vinyl products in Bloomington’s climate. The failures we repair are almost always on older units whose seals and glazing gaskets have aged out. If wind-driven dust or water intrusion shows up, the fix is usually gaskets and sealant, not the glass.
You can, but the sequencing matters. San Bernardino County egress and energy-code review applies to new PGT openings on a Bloomington ADU conversion, so we order units only after the county confirms sill heights and opening sizes. We’ve coordinated PGT sliding door placement with county review on multiple Valley Blvd-area conversions. Ask Nolan about the approval path when you call.
Usually repair. Worn rollers and dirty or scarred tracks account for the vast majority of hard-sliding PGT aluminum doors in Bloomington, and roller replacement with OEM or matched aftermarket parts often restores smooth operation. Replacement makes sense when the track is deeply grooved, the frame is bent, or the glass unit has failed. We’ll diagnose it in person and show you the difference on the quote.
Yes. We install PGT WinGuard Impact Series windows for homeowners who want a stronger envelope against wind, flying debris, and forced entry. Impact-rated glass also cuts outside noise, which matters on Bloomington lots near Valley Blvd and railroad corridors. Call (866) 253-8554 for a free impact-window estimate.
Service Areas Near Bloomington
Elmwood Contractors handles PGT window and door work across the west Inland Empire. We serve Bloomington, Fontana, Rialto, Highland, and San Bernardino. We also run PGT service in Highgrove and PGT service in Rialto, and we cover the greater Bloomington service area including Valley Blvd corridor properties and the citrus-era streets north of I-10. Every visit starts with a site inspection and a written line-item quote. For complete PGT sales & service information across all our markets, call (866) 253-8554.
Book Your PGT Service in Bloomington Today
If your PGT windows are leaking dust, your sliders are grinding, or you’re planning an addition that needs new openings permitted through San Bernardino County, we’ll walk the property with you and put the scope in writing. Call (866) 253-8554 to schedule a free PGT service estimate in Bloomington.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving Bloomington and the Inland Empire since the company’s founding.