Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Construction in San Antonio Heights, CA | Elmwood Contractors
We provide independent GAF roofing installation and repair across San Antonio Heights, from full Timberline tear-offs to targeted flashing and valley fixes. The one thing that makes our GAF work different here is that we’ve spent years reading the county’s fire-severity requirements and watching how stepped hillside drainage punishes a roof assembly. Call (866) 253-8554 for a free estimate from a contractor who can name every component going on your roof before the contract is signed.
Why San Antonio Heights Residents Choose Us for GAF Service
Most roofing crews working 91784 know how to nail shingles. Fewer know why a GAF Timberline HDZ assembly behaves differently on a 22-degree slope versus a 40-degree one, or what happens to an original 1960s three-tab roof when the Santa Anas hit it for three straight days. We do. Nolan Shepherd has been running Elmwood Contractors for two decades, and he specs GAF systems the way a framer checks plumb: the right material in the right place. Everything else is just catching up to that decision.
We’re an independent GAF service provider. That means we read the manufacturer’s assembly specs, wind ratings, and fire classifications directly rather than leaning on an authorization we don’t have. We install genuine GAF components because the rated assembly depends on matched parts: starter, underlayment, shingles, ridge, and ventilation working as one system. When you call us about a leaking valley or a blown-off ridge cap in San Antonio Heights, we show up knowing what the original roof was likely built with and what the county will want to see on the permit.
Styles & brands we work with
Common GAF Construction Problems We Solve in San Antonio Heights
- Curled, granule-shedding three-tab roofs from the 1950s through 1970s. Original organic-mat GAF Royal Sovereign and similar three-tabs don’t hold up under decades of inland heat. We see widespread granule loss and curling across the west and south planes. On sloped foothill lots, the uplift at gable ends and ridge edges accelerates blow-off, especially after a strong Santa Ana event.
- Exposed nail heads and granule loss along valleys and rake edges. Steep-pitch hillside roofs shed granules faster at the transition points. Once the granule layer is gone, the asphalt oxidizes and the nail heads sit proud. In a high-fire-severity zone, those become ember entry points, and that’s a conversation every San Antonio Heights homeowner should have before the next fire season.
- Heat-trapping attic ventilation on mid-century custom homes. The 1950s-70s custom builds throughout the foothills rarely had adequate intake and exhaust ventilation. Heat builds under the deck and cooks shingles from beneath, shortening service life well before the warranty period ends. We correct ventilation as part of any re-roof, not as an afterthought.
- Rusted or failed flashing at additions, skylights, and valley transitions. Winter rain runs hard down the alluvial fan slopes here. When the flashing or valley metal was never updated at a prior addition or skylight, that’s where leaks show up first. We replace valley metal and step flashing with materials sized for the actual water volume these stepped roofs carry.
- Blocked or undersized gutters and downspouts on multi-level roofs. One roof plane draining onto another is normal in San Antonio Heights. What isn’t normal is a 2×3 downspout trying to handle the runoff from an upper tier during a February downpour. We see fascia rot and retaining wall erosion directly below these choke points.
GAF Service in San Antonio Heights: What Local Conditions Mean for Your Roof
San Antonio Heights sits on unincorporated San Bernardino County land, not within Upland city limits. That single fact trips up out-of-area builders who assume city jurisdiction, and it changes how your GAF re-roof gets permitted. We pull permits through San Bernardino County, and we know what the county’s high-fire-severity requirements mean for roof assemblies: Class A fire-rated covering, ember-resistant detailing at eaves and valleys, and clear documentation of the underlayment and assembly components. On the steep, stepped lots above the alluvial fan where San Antonio Heights roads climb toward the San Gabriels, a roof isn’t just a roof. It’s the first line of defense against both fire and the winter rain that sheets down those slopes. We size gutters, downspouts, and valley flashing for that stepped drainage because ignoring it means the lower roof plane and the retaining wall below take the damage. That’s not a generic line. That’s what we see on nearly every multi-level roof in 91784.
GAF Models & Products We Service in San Antonio Heights
We install and repair the full residential GAF lineup: Timberline HDZ architectural shingles, Timberline UHDZ for premium architectural profiles, Royal Sovereign three-tab for period-appropriate repairs on original 1960s-70s homes, and Liberty low-slope roll roofing or modified bitumen for porch sections and flat transition areas. We carry genuine GAF starter, underlayment, ridge caps, and ventilation components so San Antonio Heights repairs don’t wait on a supply house order. When a roof is still structurally sound, we’ll patch it with matched materials rather than sell a tear-off. When granule loss is past the point of repair and the deck needs correction, we’ll tell you straight that repair money is better spent on a full assembly. That’s the honest math, and we’ve been giving it to San Antonio Heights homeowners long enough to know they appreciate it.
On a stepped lot off the hillside streets above Upland, we opened a 1960s custom home’s original three-tab roof to find granule loss across the west plane and rusted valley metal carrying runoff from the upper tier. We tore off to the deck, corrected the ventilation, installed a GAF Timberline HDZ system with new valley flashing and upsized downspouts aimed away from the retaining wall, and the lower roof plane has stayed dry through two winters since.
See the difference
Before
After
Before
After
Before
AfterGAF Service Pricing in San Antonio Heights
Roofing prices in San Antonio Heights track the same ranges as the broader Fullerton market, with local factors like steep-pitch access, multi-level roof planes, and county permit requirements influencing the final number. Here’s what to expect:
| Service | Typical Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
A free estimate from us includes a written line-item quote with the exact GAF components going on your roof. Call (866) 253-8554 and we’ll walk the roof with you, explain what we see, and price the work so you know the number before we start.
Serving San Antonio Heights, CA — Our Local Coverage Area
We’re based in the San Antonio Heights area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – GAF Construction in San Antonio Heights
Do you pull the roof permit through San Bernardino County rather than a city for a San Antonio Heights re-roof?
Yes. San Antonio Heights is unincorporated county land, so we pull permits through San Bernardino County, not Upland or any city. We’ve done enough permits in 91784 to know the county’s submittal requirements and inspection sequence, which keeps the job moving without a stop-work surprise.
Does a GAF roof in 91784 need special fire-rated components?
Yes. The high-fire-severity foothill zone requires a Class A fire-rated roof assembly. That means the shingles, underlayment, and detailing all have to work together to the standard the county enforces. We specify genuine GAF components that meet the rating and install them with ember-resistant detailing at eaves, valleys, and ridge lines. Call (866) 253-8554 if you want us to assess your current roof against that standard.
My hillside roof has one level draining onto another – what usually fails first?
Valley metal and step flashing fail first. The upper roof plane concentrates water into the valley, and if the metal was undersized or never updated at a prior addition, it rusts through or separates at the seams. We size valley flashing and downspouts for the actual stepped drainage on the lot, because the water volume on these slopes is real. Call (866) 253-8554 for a free assessment of your valley and flashing condition.
Can my original 1960s three-tab roof be repaired instead of replaced?
Sometimes. If the granule loss is localized and the deck and flashing are still sound, we’ll patch with matched GAF Royal Sovereign three-tab and honest commentary. If the granule loss is widespread across a whole plane or the deck is compromised, repair money is better spent on a full assembly. We’ll tell you which one applies to your roof, and the estimate is free either way at (866) 253-8554.
Do you install GAF Timberline on steep-pitch roofs on these foothill lots?
Yes. We install Timberline HDZ and UHDZ on steep-pitch hillside roofs throughout San Antonio Heights. The steeper the plane, the more important the starter course, nail pattern, and ventilation become, and we build the assembly to the manufacturer’s spec for the actual slope. For an exact quote on your roof’s pitch and square footage, call (866) 253-8554.
Service Areas Near San Antonio Heights
We serve San Antonio Heights and the surrounding foothill and valley communities. Beyond 91784, we handle GAF sales & service across the area, including GAF service in Rancho Cucamonga for the eastern foothill communities and GAF service in Ladera Ranch for south county clients. Our full San Antonio Heights service area page covers the scope in more detail.
Book Your GAF Service in San Antonio Heights Today
We’ll walk your roof, read the assembly, and price the work in writing. Call (866) 253-8554 for a free estimate from a contractor who names every GAF component before the contract is signed.
Written by Nolan Shepherd, Owner at Elmwood Contractors, serving San Antonio Heights and the surrounding foothill communities.